현재위치 : HOME> PRODUCT> 기타 산업용디바이스
Load Registor
5 Volt Load Resistor: Improves the regulation and performance of disk arrays, and other light +5V loads.It is highly recommended that you purchase this option if you are NOT installing a hard drive inside your industrial computer system. Without this option, you may experience performance problems if your PCI card(s) do not draw any 5 volt current from the power supply.
Designed for Heat Sink Mounting Low OHMIC values down to R005
Solder, Cable, Threaded or Fast-on Terminations Inductive or Low Inductance
ATX Power Supply Tester
Save diagnostic time with our universal ATX Power Supply Tester. This innovative device quickly and accurately determines if a computer problem is related to the power supply or caused by failure of another component.
Computer Over-Temperature Thermal Alarm
Don't wait for the acrid smell of burnt components! With our inexpensive, compact ELK-TA110, you'll know if your computer is overheating?before any damage occurs. Every PC needs one!
Computer Fans Unreliable : Cooling fans are low-cost mechanical devices that fail more often than any other system component. Since their failure is often masked by background noise, an alarm is needed to signal the problem.
Overheating causes damage : Without proper air circulation, heat builds-up inside the computer. Over time, sensitive components like the CPU or hard drive undergo physical damage from excessive expansion.
Constant Temperature Monitoring : The ELK-TA110's thermistor constantly monitors your PC's temperature. Should it reach an unsafe 110°F, a loud alarm is triggered. It shuts off automatically when the interior temperature drops back below 110°F.
Fits all computers : Compatible with absolutely any computer, the ELK-TA110 measures only 1" x 1.5", and draws less than 1/10th watt of power.
Simple Installation : Just open up your computer, plug the ELK-TA110 into a spare drive connector, and place it in a convenient location.
Industrial Computer System Monitoring Module
Power & Voltage Detection
Fan Performance Audit
Thermal Management Control
Remote Warning Applicable
Fits in 3.5" Drive Bay
Support AT / ATX System
Thermal Management Card
Two Sets of Temperature Sensor
Three Level Temperature Option (40℃,50℃, 60℃)
Front Panel LEDs System Status Display
External Alarm Connector and Internal Buzzer
2-Pin Fan Failure Detect and Control
External Over Heat Warning Buzzer for Thermal Management Card
Works with:
- ELK-GHA-CO01
- ELK-GHA-CO02
- ELK-GHA-CO03
Slim 3.5" 1.44MB FDD
Fits in a 3.5" Drive Bay
ELK-LR5V1A Load Registor
ELK-ATX-PST ATX Power Supply Tester
ELK-TA110 Industrial(Commercial) Computer Over-Temperature Thermal Alarm
ELK-ISMM Industrial Computer System Monitoring Module
ELK-TMC Thermal Management Card
ELK-Buzzer Over Heat Warning Buzzer
ELK-FD35-S Slim 3.5" 1.44MB FDD
All specifications within this document are subject to change without notice.