ÇöÀçÀ§Ä¡ : HOME > PRODUCT > ¸ÖƼÆ÷Æ®½Ã¸®¾óÁ¦Ç° > Synchronous > PCMCIA
PCMCIA RS-232/422/485/530/530A/V.35 Synchronous Serial Interface: ELK-PM3612
Type II, 16-bit PCMCIA 2.01 (JEIDA 4.1) compliant form factor
Configurable for RS-232, RS-422, RS-485, RS-530, RS-530A, or V.35
Z85233 Enhanced Mono Serial Communications Controller (EMSCC¢â)
Software programmable baud rate
Hot-swappable
12¡± detachable cable terminates to DB-25M connector
   
The ELK-PM3612 serial interface card provides a single PCMCIA synchronous serial link to devices that require mobile communications. Simply install the V4 driver, plug the ELK-PM3612 card into a PCMCIA slot, and the card is automatically recognized by the system. The driver provides support for HDLC and SDLC. Certain configurations of Bi-Sync, Monosync, and RAW protocols are supported. Please call to discuss your specific requirements.
Number of ports 1
Communications chip 85233 ESCC
Max. data distance 50 feet (RS-232), 4000 feet (RS-485)
Max. Data Rate 64K bps (burst)
RS-485 Operation Full Duplex (4 wire), Half Duplex (2 wire)
Operating Temperature 0 - +70¡ÆC
Storage Temperature -50 - +105¡ÆC
Humidity Range 10 - 90% R.H.
ELK-PM3612 PCMCIA RS-232, RS-422, RS-485, RS-530, RS-530A, V.35 Synchronous Serial Interface Card (uses Z85233)
ELK-CA104 DB25 Male to DB25 Female 72" in Length
ELK-CA107 DB25 Female (RS-530) to DB-37 Male (RS-449 DTE), 10" in length
ELK-CA118 26-Pin IDC Ribbon Cable to DB25 Male, 8" in Length
ELK-CA159 DB25 Female (RS-530) to DB15 Male (X.21) Cable, 72" in Length
ELK-CA178 DB25 Female (V.35) to ITU-T ISO-2593 Style Connector (V.35) Cable, 72" in Length
ELK-TB04 Terminal Block Kit - ELK-TB04 +ELK-CA104 Cable
ELK-KT104 Terminal Block - DB25 Female to 25 Screw Terminals
All specifications within this document are subject to change without notice.