현재위치 : HOME > PRODUCT > 멀티포트시리얼제품 > Synchronous > ISA > RS-422/485/530
PCI RS-232/422/485/530/530A V.35 Synchronous Serial Interface(uses Z85230): ELK-PCI5402
Each port individually configurable for RS-232/422/485/530/530A, or V.35
Z85230 Enhanced Serial Communications Controller (ESCC™)
Data rates to 128K bps (Burst mode)
Included fan-out cable terminates to four DB-25M connectors
 
   
The ELK-PCI5402 is a four-port PCI bus RS-232, RS-422, RS-485 synchronous serial interface. Designed using the popular Zilog Z85230 Enhanced Serial Communication Controller (ESCC), the board is an ideal solution for military, satellite, radar, banking, and other applications that require robust synchronous communications. For maximum flexibility, each of the serial ports can be individually configured for RS-232, RS-422, or RS-485 communications. In RS-232 mode, all common modem control signals are implemented for compatibility with a wide range of peripherals. A digital phase lock loop (DPLL) is included on each port, and the board supports data rates up to 128K bps in burst mode. For easy implementation, a fan-out cable is included that terminates the onboard 120-pin high-density Molex connector to four DB-25M connectors. Terminal blocks, adapter cables other helpful accessories are available to facilitate rapid installation. The ELK-PCI5402 features Universal Bus (3.3V and 5V) compatibility with both new and legacy computer systems. Software support, critical for successful synchronous communication development, is provided through Sealevel's SeaMAC v4 driver. HDLC/SDLC protocols are supported as well as certain configurations of Monosync, Bi-sync, and Raw modes.
Number of ports 4
Communications chip Z85230
Max. data rate 128K bps (burst)
Max. data distance 50 feet (RS-232), 4000 feet (RS-485)
Operating temperature 0 - +70°C
Storage temperature -50 - +105°C
Humidity range 10 - 90% R.H.
ELK-PCI5402 PCI RS-232, RS-422, RS-485, RS-530, RS-530A, V.35 Synchronous Serial Interface (uses Z85230)
ELK-CA104 DB25 Male to DB25 Female 72" in Length
ELK-CA107 DB25 Female (RS-530) to DB-37 Male (RS-449 DTE), 10" in length
ELK-CA159

 DB25 Female (RS-530) to DB-15 Male (X.21), 72" in Length Converts the Standard DB-25 Implementation of RS-530, RS-422 to the ITU-T X.21 Standard
ELK-CA174 DB25 Female to DB25 Male, Twisted Pairs 72" in Length.
ELK-CA178 DB25 Female (V.35) to ITU-T ISO-2593 Style Connector (V.35) Cable, 72" in Length
ELK-KT104 Terminal Block Kit - TB04 + CA104 Cable
ELK-TB04-KT Terminal Block Kit - DB25 Female to 25 Screw Terminals
All specifications within this document are subject to change without notice.