|
|
| 현재위치 : HOME > PRODUCT > 멀티포트시리얼제품 > Synchronous > Low Profile PCI |
|
 |
|
|
|
|
The ELK-LP5104 Low Profile PCI serial interface provides one synchronous serial port configurable for RS-232, RS-422, RS-485, RS-530, RS-530A, or V.35. The board is capable of data rates to 10M bps. The ELK-LP5104 utilizes a Z16C32 Integrated Universal Serial Controller (IUSC) with built-in DMA controller and 32-byte FIFO buffer. The board is MD1 Low Profile and Universal Bus (3.3V and 5V) compatible. The ELK-LP5104 is for use in Low Profile PCI slots only.
ELK-LP5104는 Low Profile PCI버스용 제품이며, ELK-PCI5104S는 표준크기의 PCI버스용입니다. |
|
|
|
|
| Number of ports |
1 |
| Communications chip |
Z16C32 IUSC
|
| Max. data distance |
50 feet (RS-232),
4000 feet (RS-485) |
| Max. data rate |
10M bps (burst) |
| RS-485 Operation |
Full Duplex (4 wire),
Half Duplex (2 wire) |
| Operating temperature |
0 - +70°C |
| Storage temperature |
-50 - +105°C |
| Humidity range |
10 - 90% R.H. |
|
|
|
|
|
 |
 |
| ELK-LP5104 |
Low Profile PCI RS-232 /422/485/530/530A/V.35 Synchronous Serial Interface(uses Z16C32) |
| ELK-LP5104S |
Universal Bus PCI RS-232/422/485/530/530A/V.35 Synchronous Serial Interface with Standard Size PCI Bracket(uses Z16C32) |
| ELK-CA104 |
DB25 Male to DB25 Female 72" in Length |
| ELK-CA107 |
DB25 Female (RS-530) to DB-37 Male (RS-449 DTE), 10" in length |
| ELK-CA159 |
DB25 Female (RS-530) to DB-15 Male (X.21), 72" in Length Converts the Standard DB-25 Implementation of RS-530/422 to the ITU-T X.21 Standard |
| ELK-CA174 |
DB25 Female to DB25 Male, Twisted Pairs 72" in Length. |
| ELK-CA178 |
DB25 Female to ITU-T ISO-2593 Style Connector (V.35), 72" in Length Converts the ASAN ST DB-25 Implementation to the ITU-T V.35 Mechanical Standard |
| ELK-TB04 |
Terminal Block - DB25 Female to 25 Screw Terminals |
| ELK-KT104 |
Terminal Block Kit - ELK-TB04 +ELK-CA104 Cable |
All specifications within this document are subject to change without notice. |
|
|
|
