|
|
| 현재위치 : HOME> PRODUCT> PCI Expansion시스템> 7 Slot PCI-to-PCI(32-bit/33MHz) |
|
 |
|
|
|
Add Seven 32-bit/33MHz PCI Slots to your Server or Desktop Computer
When you need more PCI slots to increase the functionality of your desktop computer or server configuration, there's no reason to bust your budget for an expensive high-end multiple PCI slot computer or server. Instead, our 7 Slot 32-bit/33MHz PCI-to-PCI Expansion Systems can provide all the slots you need to expand your current configuration. |
|
|
|
|
Unique Applications Require Innovative Solutions
Sure, many users are satisfied with the limited number of PCI slots that are available in most computers. However, there are numerous performance and functionality hungry professionals, like you, in many industries that simply need more PCI slots than a typical computer provides. Even with the introduction of more robust desktop computers and servers, the need for increased functionality of high-bandwidth applications has still not been satisfied. If you have a powerful application that requires the use of several PCI cards, increase the number of PCI slots in your system with a ASAN ST PCI Expansion System.
ASAN ST's 7 Slot 32-bit/33MHz PCI-to-PCI Expansion System accommodates seven full-length 32-bit or 64-bit PCI cards in a separate enclosure (rack-mount or tower) that connects to a host desktop or server through an available PCI slot. With ASAN ST's PCI Expansion Technology, everything installed in the enclosure actually acts as if it's inside the host computer. This is accomplished by the chassis communicating to the host via a 1 or 1.5 meter cable and a short 'universal' PCI host card providing up to a 132MB/second data transfer rate between the host computer and the hardware within the chassis. |
|
|
|
|
| Enclosure |
4U rack-mount (All Steel)
or
ATX Mid-Tower (Steel Chassis with Plastic Front Panel) |
| Dimensions |
Rack-mount: 19"W x 7"H x 17.7"D, Tower:
7"W x 18.1"H x 17.3"D |
| Weight |
Rack-mount:
24 lbs. or 11.804kg,
Tower: 22 lbs. or 10kg |
| Cooling System |
Rack-mount: One 70-105 CFM fan with removable air filter, Tower:
One 35 CFM high volume fan |
| Disk Drive Bays |
Rack-mount: up to eight 3.5" internal disk drives
Tower:
For three 5.25" external, one 3.5" external, and three 3.5" internal |
| Backplane |
Seven standard PCI slots (32-bit/33MHz) |
| Power Supply |
Standard: 300W (auto-switching AC), Optional:
400W (auto-switching), 275W 'Quiet'(Rack-mount) |
| Cable Length |
Standard: 1 meter, Optional: 1.5 meter |
| PCI Local Bus |
PCI Local Bus Specification: Revision 2.2 |
| PCI Bridge |
PCI Bridge Architecture Specification: Revision 1.1 |
| Interconnect Bandwidth |
132 MB/sec (Theoretical Max. of PCI 33/32) |
| Supported Operating Systems |
Win XP, Win 2000, Win NT, Win ME, Win 98SE, Mac OS X (version 10.2.2+), Mac OS 9.x, Red Hat Linux 9 and Solaris 9 |
| MTBF |
25,000 hours |
| Environmental |
Operating Temperaturet: 0 to 50℃ Storage Temperature: -20 to 60℃
Relative Humidity: 5% to 85%, Non-condensing |
|
|
|
|
|
 Medical Imaging |
Camera Interface |
Video Processing |
Military |
| Aerospace |
Field Test & Service |
Industrial Automation/Control |
Video Capture |
| Audio Editing |
Test & Measurement |
Multiple Monitor Workstation |
Video Effects |
|
|
|
|
|
Cost effectively add PCI slots to your desktop computer or server
Our 'universal' PCI host interface card works in host computers that use either 5 volt or 3.3 volt signaling
Reduce capital outlay for computers that only provide one or two PCI slots
Multiple expansion systems can be used in a daisy-chain or fan-out configuration |
|
|
|
|
 |
 |
| ELK-P7T |
32-bit/33MHz 7 Slot Tower PCI to PCI Expansion and 1-meter Cable (300W Power Supply) |
| ELK-P7R |
32-bit/33MHz 7 Slot Rack Mount PCI to PCI Expansion and 1-meter Cable (300W Power Supply) |
| ELK-P7R-D1 |
32-bit/33MHz 7 Slot Rack Mount PCI to PCI Expansion and 1-meter Cable (300W, Digidesign Approved) |
| ELK-P7RC1.5D1 |
32-bit/33MHz 7 Slot Rack Mount PCI to PCI Expansion and 1.5-meter Cable (300W, Digidesign Approved) |
| ELK-P7RQ |
32-bit/33MHz 7 Slot Rack Mount PCI to PCI Expansion and 1-meter Cable (Quiet 275W Power Supply) |
| ELK-P7RQ-D1 |
32-bit/33MHz 7 Slot Rack Mount PCI to PCI Expansion and 1-meter CBL (Quiet, 275W, Digidesign Approved) |
| ELK-PI7RQC1.5D1 |
32-bit/33MHz 7 Slot Rack Mount PCI to PCI Expansion and 1.5-meter CBL (Quiet, 275W,Digidesign Approved) |
| ELK-P7R4 |
32-bit/33MHz 7 Slot Rack Mount PCI to PCI Expansion and 1-meter Cable (400W, Power Supply) |
| ELK-RSLIDE |
18" Rack slide kit |
| ELK-IDC35 |
Internal disk drive cage for (4) 3.5" disk drives |
| ELK-LR5V |
5 Volt Load Resistor: It is highly recommended that you purchase this option if you are NOT installing a hard drive inside your expansion system. Without this option, you may experience performance problems if your PCI card(s) do not draw any 5 volt current from the power supply. Please see FAQs for more information. |
| ELK-PCIHIF68 |
PCI Host Interface Card (required to use 1 slot expansion with a desktop computer) |
| ELK-CBL1PCI |
1-meter PCI expansion cable |
| ELK-CBL1.5PCI |
1.5-meter PCI expansion cable |
| ELK-CBHIF |
CardBus host interface card |
|
|
▶모든 표준시스템은 300W AC power supply가 내장된 Rack-mount 또는 Tower Enclosure, PCI Host Interface Card, 1-meter 확장 cable, 7 slot ATX Form Factor Passive Backplane(32-bit/33MHz)으로 구성되어 있습니다. 400W 또는 275W 'Quiet' power supply와 1.5 meter cable은 선택사양 입니다.
▶시스템의 요구조건
32-bit/33MHz PCI slot, 64-bit/33MHz PCI slot, 64-bit/66MHz PCI slot, PCI-X PCI slot 중 적어도 한개의 슬롯이 있는 PC기반 Host Computer 또는 서버
All Specifications within this document are subject to change without notice. |
|
|
