|
|
| ÇöÀçÀ§Ä¡ : HOME> PRODUCT> »ê¾÷¿ëÇ÷¡½Ãµð½ºÅ©> 40/44-pin Flash Disk Module |
|
 |
|
|
|
|
| ASAN ST 's 40/44-pin Form Factor Flash Disk Modules are based on a low power design using flash memory as the storage media. Since there are no moving parts or batteries that require maintenance, IDE Flash Disk Drives provide reliable operation in conditions that can be normally hostile to data. The solid-state components design means that there are no seek errors even under extreme shock and vibration. IDE Disk Drives can operate in 5.0V Systems. They have a standard 40/44-pin IDE interface which makes it an easy replacement for a hard disk drive. Mean Time Between Failure (MTBF) is an astonishing 1,000,000 hours. It is a perfect choice of solid-state mass-storage drive for industrial control systems, telecommunications and equipment that must function remotely.
|
|
|
|
|
| Feature |
Description |
| Dimensions |
Horizontality 44pin: 53(W) x 12(H) x 44(D) mm
Verticality 40pin: 53(W) x 5.0(H) x 47(D) mm |
| Capacity |
16MB ~ 1GB (Unformatted) |
| Performance |
Data Transfer Rates
To/From Flash Memory: Up to 10MB/sec, Idle to Read/Write: <1 §Á
To/From Host : Up to 20MB/sec, Command to DREQ : <200 §Á |
| Voltage |
5V ¡¾10% |
Current
Consumption |
Read Mode : 65mA (Max.), Write Mode : 65mA(Max.)
Standby Mode : 7mA(Max.) |
| Environmental |
Storage Temperature : -40 ¡É to +85 ¡É
Relative Humidity : 95% (Max)
Altitude : 0 - 50,000 ft
Shock : Half Sine, 50G, 11ms
Vibration : 16.4G, |
Reliability |
MTBF: Over 1,000,000 Power On Hours(POH)
Error Rate: Less than 1 bit error 10 15 bits |
| Compatibility |
Standard IDE(40/44-pin) Interface |
|
|
|
|
|
 |
 |
ELK-FDMXXH(V)
-XXXX
|
XX: Connector Type(40 -> 40-pin, 44 -> 44-pin)
H: Horizontal, V: vertical
xxx : Capacity(16MB->0016), 1GB->1024 etc.)
For Example: 40-pin, 512MB, Vertical
Model: ELK-FDM40V-0512 |
All specifications within this document are subject to change without notice. |
|
|
|