|
|
| 현재위치 : HOME> PRODUCT> 산업용플래시디스크> High-End Flash Disk |
|
 |
|
|
|
|
Decrease data access times and increased data transfer rates with the most innovative and reliable solutions for information retrieval and storage.
Today's data explosion has created the need for a faster and higher performance storage solution for high-speed networking, broadband communications, mobile computing, military, aerospace, and industrial applications. ASAN ST has responded with a storage solution designed specifically for these emerging high performance applications - Solid State, Flash-based storage - Flash Disk. Incorporate this new storage product as a stand -alone solution or as an embedded plug and play component in the system. ELK-FC-FD35 series provides increased performance by eliminating seek time and latency for faster I/O rates, and provides the advantages of exceptional performance, superior reliability, and unprecedented durability.
Reliable & Secure Solid-State, Flash-Based Storage
ASAN ST utilizes proven Solid-State Flash-based technology, a non-volatile storage solution in an industry standard 3.5-inch form factor. Ideal as a direct drop-in replacement for conventional rotating media such as hard disks and tape drives that are not only prone to short production life, but often fail in mobile computing and industrial environments where temperature fluctuations, shock, vibration, dust, moisture, or magnetic fields are present.
Given today's critical national security and defense requirements, the powerful and user-customizable securErase ® data security feature guarantees that device sanitization of your sensitive data is performed beyond retrieval. Patented PowerGuard ® also ensures that within 6 hours of losing power to the disk, securErase ® is automatically activated to resume and complete the erase process.
ELK-FC-FD35 Series
The ELK-FC-FD35 series deliver a solid solution for data storage and protection while providing the powerful performance and speed today's data-intensive applications demand. They feature patented FlashBus™ storage technology to speed performance, eliminate system bottlenecks, and offer durable storage for easy installation and start-up. ELK-FC-FD35 series requires no device drivers for installation and operation, and boasts random I/O rates of up to 40,000 IOPS, duplex burst read/write rate of up to 400 MB/sec, sustained random read/write rate of up to 160 MB/sec, and capacities of up to 155.6 GB. |
| Product Highlights |
Increased High Speed Networking*
 Operating System Independent
42 to 35 usec Access Time*
9,500 to 40,000 IOPS I/O Rate*
Facilitate Quick Data Transfers*
400 MB/sec Duplex Burst R/W Rate
68 to 160 MB/sec Sustained R/W Rate*
Highest Storage Capacities*
3.5-inch: 1024 MB to 155.6 GB
|
Unparalleled Operating Performance
Pure Solid State/Non-Volatile
1,500 Gs Operating Shock
MTBF - 2 Million Hours
-60°C to + 95°C
120,000 feet Altitude
Industry Standard Fibre Channel Interface
No Device Driver Required
2Gbit Dual Port
Completely Bootable |
|
|
|
|
| Feature |
Function |
Description |
| Physical |
Form Factor |
3.5" |
| Capacity |
3.5-inch: 1024 MB to 155.6 GB |
| Dimensions |
101.6mm(4.0") x 146.1mm(5.75") x 17.15 to 50.419mm(0.517 to 1.985") (W x L x H) |
| Weight |
264 gm(13.132 oz) to 1076 gm(37.955 oz) |
| Mounting Considerations |
HDD Industry Standard, All Orientaions |
| Connector |
40-pin SCA-2 (Level 4 Hot Swap) Fibre Channel ANSI Standards |
Power
Requirements |
Input Voltage |
5 Vdc (±5%) |
| Power Consumption |
Capacity
Write
Read
Idle |
20,480MB
15.05 watts
15.05 watts
7.9 watts |
36,864MB
15.5watts
15watts
9watts |
77,824MB
16.5watts
16.0watts
9.75watts |
|
| Performance |
Access Time |
42㎲ (42~35㎲)* |
| Duplex Burst R/W Rate |
400MB/sec |
Random Sustained
Read and Write Rate* |
Read: 68MB/sec(68~160MB/sec)
Write: 50MB/sec(50~160MB/sec) |
Random Sustained
Read and Write Rate* |
34MB/sec(34~230MB/sec) |
| Read Bit Error Rate |
<10-20 |
| Entire Media Erase |
<3 sec/memory board (8GB); 77,824MB in < 26 sec |
| Full Associative Cache |
Standard: Up to 256MB |
Environmental
|
Operating Temperature |
Commercial: 0 to 70℃ Extended: -25 to 75℃
Industrial: -40 to 85℃, Military: -60 to 95℃ |
| Humidity |
5 to 95% (Non-Condensing) |
| Shock(Operating) |
Half Sine, 50G, 11ms, Half Sine, 1,500G, 0.5ms; |
| Vibration(Operating) |
16.4G rms; Per MIL-STD-810E, Method 514.4-21 Per MIL-STD-810C |
| Altitude |
-1,200 to 120,000 feet |
| Airflow |
None required |
| Reliability |
MTBF |
> 1.9 Million Hours @ Bellcore issue 6, Method I, Case 3 |
| Undetected Data Errors |
<10-30 |
| Data Reliability |
Built-in EDC/Interleaved Reed-Solomon ECC Corrects up to Six
Random Byte Error per 528-Byte Block; Detects Burst Errors up to 9 Bytes Long |
| Data Integrity |
10 Years |
| Write Endurance(Typical) |
1GB: 27 years @ 100GB/day erase/write cycles
4.6GB: 123 years @ 100GB/day erase/write cycles |
| Read Endurance |
Unlimited |
| Security Erase Compliance |
NISPOM DoD 5220.22-M, NSA 130.-2, Air Force AFSSI 5020, Army 380-19, Navy NAVSOP-5239-26 |
| Diagnostics |
Built-in Power-up Self Tets. Self-monitoring Diagnostics Database |
User
Interface |
LEDs(Remote capability) |
Idle, Busy, Cache Busy, Fault |
| Jumper Settings |
Save Settings, Write Protect, Termination |
| Termination |
Low Voltage Differential |
| Drivers |
None Required |
| Firmware |
Field Upgradeable |
| Compatibility |
FC-AL-2, FC-PH, FC-PLDA, FC-FCP, FC-FLA, FCA-IP, IETF-IPFC |
| EMI Compliance |
CE, FCC, VCCI and AS/NZS Regulations |
| Safety Compliance |
TUV and UL |
Performance
Matrix |
Model
|
Form Factor |
Ports
|
Sustained
R/W Rates |
Full Duplex
Data Rate |
Access Times
|
IOPS
|
Capacity
|
| ELK-3F24 |
3.5"
|
Dual: 2GBit/port |
68MB/sec |
400MB/sec |
42㎲ec |
12,500 |
1024-155,648MB |
| ELK-3F2* |
3.5" |
Dual: 2GBit/port |
160MB/sec |
400MB/sec |
42㎲ec |
40,000 |
|
|
| Capacity, Height, and Weight Matrix |
Flash(512MB)
Capacity(MB) |
Flash(1024MB)
Capacity(MB) |
Flash(2048MB)
Capacity(MB) |
Height(inch) |
Height(mm) |
Weight(oz) |
Weight(gm) |
| 1024 |
|
|
0.52 |
13.13 |
9.312 |
264 |
| 2048 |
4,096 |
8,192 |
0.52 |
13.13 |
9.312 |
264 |
| 6144 |
12,288 |
24,576 |
0.68 |
17.15 |
12.487 |
354 |
| 10,240 |
20,480 |
40,960 |
0.83 |
21.16 |
15.662 |
444 |
| 14,336 |
28,762 |
57,344 |
1.00 |
25.40 |
18.872 |
535 |
| 18,432 |
36,864 |
73,728 |
1.17 |
29.79 |
22.046 |
625 |
| 22,528 |
45,056 |
90,112 |
1.34 |
33.91 |
25.221 |
715 |
| 26,624 |
53,248 |
106,496 |
1.50 |
38.05 |
28.396 |
805 |
| 30,720 |
61,440 |
122,880 |
1.66 |
42.17 |
31.570 |
895 |
|
69,632 |
139,264 |
1.83 |
46.31 |
34.780 |
986 |
|
77,824 |
155,648 |
1.99 |
50.42 |
37.955 |
1,076 |
|
| PowerGuard Height, and Weight Matrix |
| 3.5" PowerGuard |
PG1(Embedded) |
PG2 |
PG3 |
| Height(mm) |
0 |
7.70 |
11.38 |
| Weight(gm) |
124.74 |
223.97 |
326.03 |
|
|
|
|
|
|
 |
 |
| Model Number + Capacity + Options(PFIRRRC + XXXXXX + TGMC) |
| Example: 2F002F 034816 CNN(N)4 *Note (C)(4) Sub-Part Number |
Model Number
(ELK-FIRRRC) |
F: Form Factor(2: 2.5") I: Interface(F: Fibre Channel)
R: Burst(Sustained) Read/Write<002(4): 200mb/SEC(68mn/SEC) *Note(4) Sub-Part Number
Rate: 002: 200MB/sec(160MB/sec)*
C: Connector Type/Channel F: 40-pin SCA-2 Dual Port Fibre Channel Hot Swappable Level 4 |
Capacity
(XXXXXX) |
X: Capacity(MB) |
256Mbit Flash
512Mbit Flash
1024Mbit Flash
2048Mbit Flash |
256
512, 2560, 4608, 6656, 8704, 10752, 12800, 14848, 16896, 18944
1024, 5120, 9216, 13312, 17408, 21504, 25600, 29696, 33792, 37888
2048, 10240, 18432, 26624, 34816, 43008, 51200, 59392, 67584, 75776 |
| Options(TGMC) |
T: Temperature(Operating) |
C: Commercial(0 to 70℃)
E: Extended(-25℃ to 75℃)
I: Industrial(-40℃ to +85℃)
M: Military(-60℃ to +95℃) |
| G: PowerGuard |
N: No PowerGuard(Optional)
1: PowerGuard Option 1 - Auto-Save Cache to Flash on Power Down
2: PowerGuard Option 2 - Erase Mode on Power Down
3: PowerGuard Option 3 - Standby Erase Mode on Power Down |
| M: Media Type |
N: NAND Flash |
| (C): PCB Coating |
(N): No Conformal Coating **Note: Sub-Part Number
(A): Acrylic Conformal Coating **Note: Sub-Part Number
(S): Silicone Conformal Coating **Note: Sub-Part Number |
| Part Numbering Guide |
*Preliminary / Upcoming Features
**Consult Part Numbering Guide
All specifications within this document are subject to change without notice. |
|
|
|
