ÇöÀçÀ§Ä¡ : HOME> PRODUCT> »ê¾÷¿ëÇ÷¡½Ãµð½ºÅ©> High-End Flash Disk
2.5" Fibre Channel Flash Disk ELK-FC-FD25 Series
Form Factor: 2.5"
Capacity: 256MB to 75.7GB
MTBF: >1.9 Million Hours @ Bellcore issue 6, Method I, Case 3
Connector: 40-pin SCA-2
Input Voltage: 5 Vdc (¡¾5%)
Access Time: 42 §Á
Diagnostics: Built-in Power-up Self Tets. Self-monitoring Diagnostics DB
Safety Compliance: TUV and UL
Decrease data access times and increased data transfer rates with the most innovative and reliable solutions for information retrieval and storage.
Today's data explosion has created the need for a faster and higher performance storage solution for high-speed networking, broadband communications, mobile computing, military, aerospace, and industrial applications. ASAN ST has responded with a storage solution designed specifically for these emerging high performance applications - Solid State, Flash-based storage - Flash Disk. Incorporate this new storage product as a stand -alone solution or as an embedded plug and play component in the system.The ELK-FC-FD25 series provides increased performance by eliminating seek time and latency for faster I/O rates, and provides the advantages of exceptional performance, superior reliability, and unprecedented durability.
Reliable & Secure Solid-State, Flash-Based Storage
ASAN ST utilizes proven Solid-State Flash-based technology, a non-volatile storage solution in an industry standard 2.5-inch form factor. Ideal as a direct drop-in replacement for conventional rotating media such as hard disks and tape drives that are not only prone to short production life, but often fail in mobile computing and industrial environments where temperature fluctuations, shock, vibration, dust, moisture, or magnetic fields are present. Given today's critical national security and defense requirements, the powerful and user-customizable securErase ¢ç data security feature guarantees that device sanitization of your sensitive data is performed beyond retrieval. Patented PowerGuard ¢ç also ensures that within 6 hours of losing power to the disk, securErase ¢ç is automatically activated to resume and complete the erase process.
ELK-FC-FD25 Series
The ELK-FC-FD25 series deliver a solid solution for data storage and protection while providing the powerful performance and speed today's data-intensive applications demand. They feature patented FlashBus¢âstorage technology to speed performance, eliminate system bottlenecks, and offer durable storage for easy installation and start-up. ELK-FC-FD25 series requires no device drivers for installation and operation, and boasts random I/O rates of up to 40,000 IOPS, duplex burst read/write rate of up to 400 MB/sec, sustained random read/write rate of up to 160 MB/sec, and capacities of up to 75.8 GB.
Product Highlights
Increased High Speed Networking
Operating System Independent
42 to 35 usec Access Time
9,500 to 40,000 IOPS I/O Rate

Facilitate Quick Data Transfers
400 MB/sec Duplex Burst R/W Rate
68 to 160 MB/sec Sustained R/W Rate

Highest Storage Capacities
256 MB to 75.8 GB(2.5")

Unparalleled Operating Performance
Pure Solid State/Non-Volatile
1,500 Gs Operating Shock
MTBF - 2 Million Hours
-60¡ÆC to + 95¡ÆC
120,000 feet Altitude

Industry Standard Fibre Channel Interface
No Device Driver Required
2Gbit Dual Port
Completely Bootable
Feature Function Description
Physical Form Factor 2.5"
Capacity 256MB to 75.7GB
Dimensions 69.85mm(2.75") x 101.6mm(4.0") x 8.509mm(0.335") (W x L x H)
Weight 100.1 gm(3.94 oz) to 266.5 gm(10.49 oz)
Mounting Considerations HDD Industry Standard, All Orientaions
Connector 40-pin SCA-2 (Level 4 Hot Swap) Fibre Channel ANSI Standards
Power
Requirements
Input Voltage 5 Vdc (¡¾5%)
Power Consumption Capacity: 17.4GB, Write: 3.3Watts, Read: 3.1Watts, Idle: 2.4Watts
Performance Access Time 42§Á (48~35§Á)
Duplex Burst R/W Rate 400MB/sec
Random Sustained
Read and Write Rate
Read: 68MB/sec(68~180MB/sec)
Write: 68MB/sec(68~180MB/sec)
Read Bit Error Rate <10-20
Entire Media Erase <3 sec/memory board (8GB)
Full Associative Cache Standard: Up to 48MB
Environmental
Operating Temperature Commercial: 0 to 70¡É Extended: -25 to 75¡É
Industrial: -40 to 85¡É, Military: -60 to 95¡É
Humidity 5 to 95% (Non-Condensing)
Shock(Operating) Half Sine, 50G, 11ms, Half Sine, 1,500G, 0.5ms;
Vibration(Operating) 16.4G rms; Per MIL-STD-810E, Method 514.4-21 Per MIL-STD-810C
Altitude -1,200 to 120,000 feet
Airflow None required
Reliability MTBF > 1.9 Million Hours @ Bellcore issue 6, Method I, Case 3
Undetected Data Errors <10-30
Data Reliability Built-in EDC/Interleaved Reed-Solomon ECC Corrects up to Six
Random Byte Error per 528-Byte Block; Detects Burst Errors up to 9 Bytes Long
Data Integrity 10 Years
Write Endurance(Typical) 1GB: 27 years @ 100GB/day erase/write cycles
4.6GB: 123 years @ 100GB/day erase/write cycles
Read Endurance Unlimited
Security Erase Compliance NISPOM DoD 5220.22-M, NSA 130.-2, Air Force AFSSI 5020, Army 380-19, Navy NAVSOP-5239-26
Diagnostics Built-in Power-up Self Tets. Self-monitoring Diagnostics Database
User
Interface
LEDs(Remote capability) Idle, Busy, Cache Busy, Fault
Jumper Settings Save Settings, Write Protect, Termination
Termination Low Voltage Differential
Drivers None Required
Firmware Field Upgradeable
Compatibility FC-AL-2, FC-PH, FC-PLDA, FC-FCP, FC-FLA, FCA-IP, IETF-IPFC
EMI Compliance CE, FCC, VCCI and AS/NZS Regulations
Safety Compliance TUV and UL
Performance
Matrix
Model

Form Factor Ports

Sustained
R/W Rates
Full Duplex
Data Rate
Access Times

IOPS

Capacity
ELK-2F2(4) 2.5"
Dual: 2GBit/port 68MB/sec 400MB/sec 42§Áec 12,500 256-75,776MB
ELK-2F2* 2.5" Dual: 2GBit/port 160MB/sec 400MB/sec 35§Áec 40,000 256-75,776MB
Capacity,
Height, and Weight Matrix
Flash(256MB)
Capacity(MB)
Flash(512MB) Capacity(MB) Flash(1024MB)
Capacity(MB)
Flash(2048MB)
Capacity(MB)
Height(inch) Height(mm) Weight(oz) Weight(gm)
256 512 1,024 2.048 0.335 8.509 3.940 111.6974
  2,560 5,120 10,240 0.496 12.598 5.580 158.190
  4,608 9.216 18,432 0.657 16.688 7.210 204.399
  6,656 13,312 26,624 0.818 20.777 8.850 250.893
  8,704 17,408 34,816 0.979 24.867 10.490 297.386
  10,752 21,504 43,008 1.140 28.954 12.130 343.879
  12,800 25,600 51,200 1.301 33.043 13.770 390.373
  14,848 29,696 59,392 1.462 37.132 15.410 436.866
  16,896 33,972 67,584 1.623 41.221 17.050 483.359
18,944 37,888 75,776 1.784 45.310 18.690 529.852
PowerGuard Height, and Weight Matrix
2.5" PowerGuard PG1(Embedded) PG2 PG3
Height(mm) 7.696 7.696 10.922
Weight(gm) 87.88 87.88 138.92
Model Number + Capacity + Options(PFIRRRC + XXXXXX + TGMC)
Example: 2F002F 034816 CNN(N)4 *Note (C)(4) Sub-Part Number
Model Number
(ELK-FIRRRC)
F: Form Factor(2: 2.5") I: Interface(F: Fibre Channel)
R: Burst(Sustained) Read/Write<002(4): 200mb/SEC(68mn/SEC) *Note(4) Sub-Part Number
Rate: 002: 200MB/sec(160MB/sec)*
C: Connector Type/Channel F: 40-pin SCA-2 Dual Port Fibre Channel Hot Swappable Level 4
Capacity
(XXXXXX)
X: Capacity(MB) 256Mbit Flash
512Mbit Flash
1024Mbit Flash
2048Mbit Flash
256
512, 2560, 4608, 6656, 8704, 10752, 12800, 14848, 16896, 18944
1024, 5120, 9216, 13312, 17408, 21504, 25600, 29696, 33792, 37888
2048, 10240, 18432, 26624, 34816, 43008, 51200, 59392, 67584, 75776
Options(TGMC) T: Temperature(Operating) C: Commercial(0 to 70¡É)
E: Extended(-25¡É to 75¡É)
I: Industrial(-40¡É to +85¡É
)
M: Military(-60¡É to +95¡É)
G: PowerGuard N: No PowerGuard(Optional)
1: PowerGuard Option 1 - Auto-Save Cache to Flash on Power Down
2: PowerGuard Option 2 - Erase Mode on Power Down
3: PowerGuard Option 3 - Standby Erase Mode on Power Down
M: Media Type N: NAND Flash
(C): PCB Coating (N): No Conformal Coating **Note: Sub-Part Number
(A): Acrylic Conformal Coating **Note: Sub-Part Number
(S): Silicone Conformal Coating **Note: Sub-Part Number
Part Numbering Guide
*Preliminary / Upcoming Features
**Consult Part Numbering Guide
All specifications within this document are subject to change without notice.