I2C Interface
The ELK-PCI-POST-Serial is equipped with dual 7-Segment displays that can simultaneously display both PORT 80 and 81 data. |
Walk and Trap for Power fluctuations
The ELK-PCI-POST-I2C is also equipped with power monitoring capabilities including Trap and Walk for error conditions. |
| Monitors Sleep Mode 3 Volt Auxiliary |
Works with any PCI bus system
The ELK-PCI-POST uses the latest decoding technology, follows established BIOS standards, and fully supports the complete PCI specifications to greatly reduce or eliminate the guesswork involved in troubleshooting systems that fail to boot. |
Digital Indicators for Every P.O.S.T. Code Error
ELK-PCI-POST is the worlds first diagnostic card for monitoring P.O.S.T. results in systems utilizing PCI architecture. This test card provides the user with visual digital indicators for identifying every P.O.S.T. error code. The card is also capable of testing the presence of the Clock and Reset signals. |
Monitors Power Supply Voltages
New advanced circuitry offers precision system power voltage monitoring to help you ensure that a system's power supply is operating correctly and outputting the proper voltages. The ELK-PCI-POST checks for PCI and AGP power supply fluctuations, noises, high and low voltages, voltage spikes, and any other voltage conditions that are "out of spec." Separate green (pass) and red (fail) LEDs continuously show you the status of each systems power voltage, alerting you if a particular voltage goes "out of tolerance" for any reason. |
Tests The Presence Of Clock And Reset Signals
ELK-PCI-POST monitors the Clock and Reset lines These are the most critical signals a system needs to begin the boot-up process. ELK-PCI-POST uses LEDs to let users know, if one or both of these signals are not present. |
Plugs Into Any PCI I/O Slot
The ELK-PCI-POST plugs into any open PCI I/O slot. Once the system is powered-up, the card is already at work monitoring the BIOS P.O.S.T. routines. |
Supports Most Major BIOS Manufacturers
The ELK-POST-Parallel comes with a user friendly manual that describes error codes from all major BIOS manufacturers including AMI, AWARD, IBM, COMPAQ, PHOENIX and more... |
Also available
ELK-PCI-POST-Serial equipped with the same functions as the ELK-PCI-POST3.3 but can simultaneously display both PORT 80 and 81 data on dual 7-Segment displays, capable of outputting data through a on-board serial port, and much more.
ELK-PCI-POST3.3 Uses the latest decoding technology, follows established BIOS standards, and fully supports the complete PCI specifications to greatly reduce or eliminate the guesswork involved in troubleshooting systems that fail to boot. |
