|
|
| 현재위치 : HOME > PRODUCT > 컴퓨터진단(장애해결)시험제품 > ELK-PCI-POST3.3/5V |
|
 |
|
|
|
|
| The ELK-PCI-POST3.3/5V uses the latest decoding technology, follows established BIOS standards, and supports the complete PCI specifications to greatly reduce or eliminate the guesswork involved in troubleshooting systems that fail to boot. A must have for any PC Technician. This test card provides the user with visual digital indicators for identifying every P.O.S.T. error code from all major BIOS manufacturers including AMI, AWARD, IBM, PHOENIX and more! Capable of displaying either Port 80 or 81 with a simple switch selection. New advanced circuitry offers precision system power voltage monitoring to help you ensure that a system's power supply is operating correctly and outputting the proper voltages. The ELK-PCI-POST3.3/5V checks for PCI and AGP power supply fluctuations, noises, high and low voltages, voltage spikes, and any other voltage conditions that are "out of spec." Separate green (pass) and red (fail) LEDs continuously show you the status of each systems power voltage, alerting you if a particular voltage goes "out of tolerance" for any reason. The card is also capable of testing the presence of the Clock and Reset signals. These are the most critical signals a system needs to begin the boot-up process. The ELK-PCI-POST3.3/5V uses LEDs to let users know, if one or both of these signals are not present. Eliminate the guesswork involved in troubleshooting systems that fail to boot. |
|
|
|
|
Works with any PCI bus system
The ELK-PCI-POST3.3 uses the latest decoding technology, follows established BIOS standards, and fully supports the complete PCI specifications* to greatly reduce or eliminate the guesswork involved in troubleshooting systems that fail to boot. |
Digital Indicators for Every P.O.S.T. Code Error
The ELK-PCI-POST3.3/5V is the worlds first diagnostic card for monitoring P.O.S.T. results in systems utilizing PCI architecture. This test card provides the user with visual digital indicators for identifying every P.O.S.T. error code. The card is also capable of testing the presence of the Clock and Reset signals. |
Monitors Power Supply Voltages
New advanced circuitry offers precision system power voltage monitoring to help you ensure that a system's power supply is operating correctly and outputting the proper voltages. The ELK-PCI-POST3.3/5V checks for PCI and AGP power supply fluctuations, noises, high and low voltages, voltage spikes, and any other voltage conditions that are "out of spec." Separate green (pass) and red (fail) LEDs continuously show you the status of each systems power voltage, alerting you if a particular voltage goes "out of tolerance" for any reason. |
Tests The Presence Of Clock And Reset Signals
The ELK-PCI-POST3.3/5V monitors the Clock and Reset lines. These are the most critical signals a system needs to begin the boot-up process. The ELK-PCI-POST uses LEDs to let users know, if one or both of these signals are not present. |
| Monitors 3.3 Volt AUX |
Capable of Displaying Port 80 or 81
With a simple switch selection you may view either Port 80 or 81 post codes. |
Plugs Into Any PCI I/O Slot
The ELK-PCI-POST plugs into any open PCI I/O slot. Once the system is powered-up ,the card is already at work monitoring the BIOS P.O.S.T. routines. |
Supports All Major BIOS Manufacturers
The ELK-PCI-POST comes with a user friendly manual that describes error codes from all major BIOS manufacturers including AMI, AWARD, IBM, COMPAQ, PHOENIX and more... |
|
|
|
|
|
 |
 |
ELK-PCI-POST3.3/5V
|
PCI Bus Power On Self Test Card for Burn-In |
All specifications within this document are subject to change without notice. |
|
|
|
