|
|
| 현재위치 : HOME> PRODUCT> 컴퓨터진단(장애해결)시험제품> ELK-PCI-PHD2 |
|
 |
|
|
|
|
| The new and improved ELK-PCI-PHD2 is the 2nd generation diagnostic card. ELK-PCI-PHD2 includes all features of its predecessor and adds many enhancements that are direct results of suggestions we have received from our customers. Unlike POST cards, ELK-PCI-PHD1 performs a series of active diagnostics to detect most system failures. ELK-PCI-PHD1's design incorporates on-board Flash firmware, memory, and video port, enabling the card to test seemingly "dead" mother boards. The card is capable of running complete diagnostics on a PCI compliant system even if memory , keyboard and video adapters are absent or dead. ELK-PCI-PHD2 supports older Intel Pentium machines to the latest Pentium 4 systems- including AMD Athlon and Opteron 64-bit processors. This unique test equipment provides users with a comprehensive range of circuit diagnostics for system PCI Bus, RAM, DMA controllers, page registers, keyboard controller, interrupt controllers, timers, CMOS clock, and many other support chips. In peripheral diagnostic mode, ELK-PCI-/PHD series will test RAM, Disk Drives, Graphics cards, I/O devices and display system configuration. ELK-PCI-PHD2 utilizes 3.3 volt PCI slot technology and can be inserted and used in both 3.3 and 5 volt PCI slots. This allows the card to be used in earlier generation Pentium boards as well as the latest server motherboards. Once installed into a PCI slot, ELK-PCI-/PHD series will perform a series test of diagnostics targeting the proper functionality of the PCI Bus. The analysis of the PCI slot begins by testing the presence and the accuracy of the 3.3 volt signal. The analysis continues by testing the header space, PCI Bridge, and burst transaction capability. The ELK-PCI-/PHD series will also interrogate all PCI slot assignments. The ELK-PCI-PHD1 can also be used to verify the PCI bus signals meet industry compatibility criteria. It runs the most comprehensive tests to eliminate the guesswork and save time. ELK-PCI-PHD2 runs 150 specific motherboard tests in less than five minutes. These tests aggressively test specific features of a motherboard's chipset and other components. The card runs 22 PCI bus/slot, 12 keyboard controller, DMA controller, 23 Interrupt controller, 8 CMOS and Real Time clock, 9 Port B and system signals, 13 critical memory and memory controller, 16 timer controller, 8 graphic and 2 main BIOS socket tests. That's almost 150 tests containing over 1000 individual component tests. The Extended Diagnostic Mode will test most of your peripherals. It contains almost 300 peripheral tests. Using pop-up menus, simply select a test and press enter. Some of the tests contained in the Extended mode include: Memory- Base, extended, cache and video; Drives- Hard, Floppy, CD-ROM, DVD,CDRW, ARMD (Zip and LS120), keyboards, I/O ports (USB, serial, modem and parallel), system configuration, monitors, burn-in, and more without the need for disk based software. Now also supports detection of network, sound and PCI modem devices. Newly added is the onboard RS232 port that allows the ELK-PCI-PHD2 to output test results to a remote computer. This allows all test results to be remotely monitored using data logging software such as Hyper Terminal. Using optional temperature sensing probes, real time temperature, measured in Fahrenheit and Celsius simultaneously, readings can be display via the dual 7-segment displays or routed through the serial port. ELK-PCI-PHD2 loads from an onboard FLASH ROM and does not require any external booting devices or operating systems. Operating System independence eliminates any conflicts that may occur between the tests, any loaded TSR's, operating systems or system BIOS features. The convenience and reliability of ROM diagnostics means that technicians get results that are the most accurate and reliable than traditional OS or Floppy based products. The comprehensive motherboard testing of the ELK-PCI-/PHD1 card combined with the outstanding peripheral testing of the Extended Diagnostics ROM, make the ELK-PCI-PHD series "the best value and the most comprehensive tool on the market today". |
|
|
|
|
Dual 7-Segment POST Displays
Allows simultaneous monitoring of POST codes on both PORT 80 & 81 when booting and shows diagnostic subtest number that is currently being executed. Also used to display Real-Time Temperature and Power Voltage measurements |
8MB FLASH ROM Capacity
Uses the latest in FLASH EPROM and ASIC chip technology. The card can be upgraded via firmware; complete upgrade takes less than two minutes. ASICs allow the latest in hardware design for support of the most current systems with highest accuracy and reliability. |
3.3Volt PCI Bus Support
The ELK-PCI-PHD2 has been redesigned utilizing 3.3 volt PCI slot technology and can be inserted and used in both 3.3 and 5 volt PCI slots. |
Jump Start Mode via External Jump ROM
For machines with custom BIOS that do not allow for optional ROM boot, the ELK-PCI-PHD2 now can be ordered with optional Jump ROMs designed specifically for ELK-PCI-PHD2 to initialize the system on its own and perform its diagnostic tests independent of the system BIOS. Also, since the system's BIOS is removed, base RAM need not be present. Thus, you can use this mode to test a system which either does not have any installed base RAM or whose base RAM is malfunctioning. |
Direct(Forced) Start Mode
Forces systems to initialize without removing BIOS on compatible systems even without RAM or Video Card. |
Real-Time Temperature and Power Voltage Measurements
Utilizing onboard Sensors and optional temperature probes, the ELK-PCI-PHD2 can display Real-Time Temperature and Power Voltage Measurements on screen or route the data through the serial port. |
Onboard RS-232 Serial Port
Allows the ELK-PCI-PHD2 to output test results, Real-Time temperature and power voltage measurements to a remote computer for data logging and analysis. |
Support for latest Hard Drive size, speed, and technology
Newly supports Multi-Serial ATA Hard Drives over 300+ Gigabytes. Newly improved INVERSION Test enhanced for comprehensive Hard Drive Testing! |
Monitors 3.3volt Auxiliary
Support for NEW 64-bit Opteron and Athlon64-FX Compatible CPUs 64-bit architecture support for the next generation of high-end computing. |
Multiple Processors/Co-Processors Support
Newly supports testing of up to eight processors/co-processors. |
Support for latest CPUs and Motherboards
Additional Support for latest CPUs and Motherboards including the 865 & 875 chipset. |
Onboard Intel Network Testing with included Network Loopback
Supports 10/100/1000Mbps Intel-based chipsets with onboard LAN Ports to determine the reliability and connectivity. |
Onboard Intel Audio Testing with included Audio Loopback
Performs speaker-less interaction signals for LINE IN/OUT jacks(speakers not required) on Intel-based chipsets with onboard AC'97 sound. |
Hi-Speed USB 2.0 Testing
New auto detect mode automatically finds all installed ports. The test will perform internal and external testing (using optional ELK-QT-USB 2.0 device). During the testing process, it will detail port information and voltage used and modes supported. |
Now Includes Test CD & DVD ROMs
The Test CDs are now included in the ELK-QT-PRO. The Test CD is used to help diagnose, troubleshoot and load test your PC. A "full" disc so the testing can more precisely determine the transfer rate, seek times, and speed of the drive. |
RAM Testing
Performs the most comprehensive tests available for Base and Extended Memory (up to 4GB). Performs over 24+ different patterns of tests standard and proprietary algorithms. Provides graphic display to pinpoint exact location of failure. Newly improved to test the latest SIMMs, DIMMs, RIMMs,(SDRAM 66-133, DDR-266/333/400/466/500, DDR2-533/566/667, RDRAM(RAMBus), SRAM, ECC, Parity and Non-Parity). |
| Additional Hardware Diagnostic Features |
Boots DEAD Motherboards
Ability to boot boards without the need for POST support. ELK-PCI-PHD series' on-board components help initialize system boards that fail to boot and displays on the screen exactly which components have failed or are incompatible. |
Five Different Operating Modes
ELK-PCI-PHD2 can be configured to run in five different operating modes, Standard Diagnostic Mode, Forced Start Mode, Jump Start Mode(with optional ROMs), Extended Mode, and POST mode. All modes directly run using Self Boot Technology without the need for ANY operating system for superior low level testing. |
Up-to-date Systems
Perform sophisticated diagnostic testing on IBM and compatible PCs, ranging from older 486 machines to the latest Intel Pentium 4 EE, AMD Opteron & Athlon MP/XP, and Cyrix processors. |
Burn-In
For comprehensive, unattended system testing. New script writing allows you to program the specific tests, duration per test, and report generation capability. |
System Information
Provides a complete report on the system. Select information for motherboard, peripherals, IRQ/DMA usage, CMOS, I/O ports, PCI / PnP and Benchmarking. A newly added feature generates DMI information. This will provide detail specification of components. For example, if you want to know what kind of memory you have installed. DMI will return specifics on memory type, module type, installed size, speed, bank connections and error status. Ideal for detecting Over-clocked or Remarked CPUs. |
System Board Testing
Continuous loop testing verifies proper operation of CPU, FPU, DMA channels, interrupts, timers, BIOS, keyboard, and other I/O functions. Full testing of CMOS Clock functions is also done. |
Fully Automated
Simply insert the card in the system and power on. ELK-PCI-PHD series will run a continuous series of diagnostics without user intervention. |
Cache RAM
True cache RAM testing accomplished by determining the existence of Cache RAM and the exact amount (up to 2 megabytes). Twenty plus algorithms are used for accurate testing. |
SCSI Identifier: Detects and reports pertinent information on SCSI devices using ASPI standards. |
PCI Bus
Full report on PCI Bus states and usage. Identifies each PCI Bus component separately. Example of information: Device type, IRQ line used, and memory address occupied. |
PCMCIA Analysis
Complete PCMCIA information detailing number of adapters, number of sockets, device type, address occupied and more. Full information on PCMCIA socket services are also provided. |
Hard and Floppy Drives
An all new test to support the latest hard drives on the market. The software is capable of testing eight hard drives. Performs read, write, seek, verify, and media tests. Each test is run using the following patterns: sequential, random, butterfly and modified butterfly. Password and locking features are also available. SCSI Identifier- Detects and reports pertinent information on SCSI devices using ASPI standards. |
CD ROM
Provides complete testing for EIDE CD ROMs without the need for loading drivers. Tests are performed using direct hardware interrogation techniques. Drives up to 60x supported. |
Hard Drive Format
Provides easy routine for low level formatting of hard drives including IDE drives. This will automatically conduct a format function without user intervention. Can also be used on drives that are unrecoverable. |
FAT Editor
Provides capability of editing fat tables for all physical and logical drives. Can also be used as a Data Recovery Tool. |
Video
Complete testing for video cards with up to 64 Megs of Video RAM. Software automatically configures test to chipset type, RAM size and VESA standard. The tests are performed in highest resolution mode support by the card. |
Monitor
Displays a series of graphics to determine proper alignment of display. A step by step testing process is conducted for all modes supported by the monitor. (i.e.: 1280*1024*64K colors) |
LPT and COM ports
Tests up to eight parallel or serial ports. New auto detect mode automatically finds all installed ports. The test will also perform and internal and external (using provided loop-back plugs) modes. During the testing process, the software will detail port information, IRQ used and modes supported. |
Modems
Complete testing of internal and external modems. Auto-detection mode will automatically find and test an installed modem and displays all configuration and detailed test result information. |
Benchmarking
Speed testing for CPUs, hard drives, floppy drives, video cards and multimedia sub system. CPU Benchmarking determines throughput of CPU speed compared to average speed of similar systems. |
I/O port Monitor
3FFH (400-FFFH Low BIOS), to notify users as to which locations are either used or available. Also allows users to exempt of limit the snooping at specific addresses. Full support for extended EISA and MCA I/O ports. Perfect for I/O conflict resolution. |
Memory Scanner
Scans base RAM for all programs loaded into memory including; BIOS, Video BIOS, drivers, and any TSRs. Also helps for resolve memory conflicts in base addresses. |
Network Configuration
Details information on network type and setup parameters. Also displays a user list for active networks. |
Sound Cards
Tests 22 different sound cards. Provides sound card information along with Ad-lib, FM sound and PCM sound tests. Even without drivers (direct hardware analysis). |
Printer Tests
Tests 700 printers as well as HP mode and Postscript modes. Tests are conducted by printing samples, which must be visually confirmed. HP and PostScript modes require printers capable of supporting these features. |
|
|
|
|
|
 |
 |
ELK-PCI/PHD2
|
Professional Hardware Diagnostic Tool-II. The ELK-PCI-PHD2 Complete with ELK-PCI-PHD2 hardware card, Manual, 2 x 9-pin serial loop-backs, 1x-25-pin serial/parallel loopback, Network Loopback, Audio Loopback, Test CD & DVD ROMs, Tutorial CDROM, and "Technician Certified" labels. |
All specifications within this document are subject to change without notice. |
|
|
|
