| Dimensions |
483.2(W) x 399(H) x 299.1(D) mm, (w/o handle) |
| CompactPCI Standards |
PICMG 2.0 R3.0; PICMG 2.1 R2.0; PICMG 2.5 R1.0; PICMG 2.9 R1.0; PICMG 2.11 R1.0 |
| Form Factor |
6U cPCI with 80mm depth rear I/O |
| Enclosure |
EIA RS-310C 19" 9U high rack-mount enclosure
Coated metal plate outer covering
Guarded power switch and reset button |
| Passive Backplane |
cPCI Bus: ELK-cBP-6108R: 32-bit/33MHz PCI, ELK-cBP-6408R: 64-bit/33MHz PCI
System Slot: 1
System slot rear I/O: P3, P4 and P5 rear I/O with AB-type shroud
Peripheral slot: 7
Peripheral slot rear I/O: P3 and P5 rear I/O with AB-type shroud
H.110 bus: Comply with PICMG 2.5 on all peripheral slots
V (I/O): 3.3V or 5V (default) selectable
System slot legacy I/O: ELK-cBP-6108R: FDD, IDE pin compatible with ELK-cPCI-6760D and 6780
System slot legacy I/O: ELK-cBP-6408R: None
Power input: ATX connector, DC screw terminals |
| Cooling System |
Front-access hot-swappable fan trays for in-take and ventilation
12V DC brush-less, dual ball bearing
5 fans for in-take and 5 fans for ventilation
Rated speed for each fan: 4000 ± 500 RPM
Rated power for each fan: 2.64W
Air flow for in-take: 241 CFM
Air flow for ventilation: 241 CFM |
| Disk Drive Bays |
Two 5.25" can support RAID and one 3.5" drive ray, built-in one silm-type CD-ROM |
| Power Supply |
Supports up to 4 in-rack 3U cPCI 8HP power supply modules with 3+1 redundancy
Supports current sharing on 5V, 3.3V, and 12V
PICMG 2.11 47-pin power interface
Available power module: ELK-cPS-H325/AC, 250W each, providing 750W + 250W redundancy |
| Weight |
23 Kg (including redundant power supply
and backplane) |
| Safety |
CE, FCC class A |
| Environmental |
|
Operating |
Non Operating |
| Temperature |
0 to 55°C |
-20 to 80°C |
| Humidity |
5 - 95% @ 40°C non-condensing |
0 - 95% @ 40°C non-condensing |
| Shock |
1G @ 10 ms |
30G @ 10 ms |
| Vibration |
0.25 G @ 5 - 150 Hz |
5G @ 5 ? 150 Hz |
| Altitude |
15,000 ft. (4,572 m) |
50,000 ft. (15,240 m) |
|
