현재위치 : HOME > PRODUCT> CompactPCI> 6U Platform
9U 8 Slots PICMG 2.16 & H.110 Packet Switched Blade System with Redundant Switch Fabric
Standard 6U CompactPCI and PICMG 2.16, 2.9 & H.110 CTI Bus
Dual PICMG 2.16 fabric slots for switching-HA
8 slots (6 node slots and 2 fabric slots), 8 RTM slots
N+1 hot swappable 500W+250W redundant cPCI power supplies
PICMG 2.9 with IPMI CMM for remote monitoring and controlling whole system via Ethernet (Optional)
One 64-bit/ 66MHz cPCI bus Segment
N+N (5+5+2) hot swappable redundant cooling architecture
Designed to meet NEBS Level 3 installation
The ASAN ST's ELK-cPCI880 Series 9U Packet Switched Blade Platform is an ideal development platform for telecom applications focusing on gateways such as media gateway, signaling gateways, as well as telecom value-added services like LBS (Location Based Service), RBT (RingBackTone), and MMS (Multimedia Message System). This flexible and reliable PICMG 2.16 compliant development platform with optimized I/O and storage provides the best solution for equipment manufacturers and system integrators and shortens time-to-market with fast growing business revenues. The ELK-cPCI880 supports 8 slots compliant with PICMG 2.16, up to 6 node slots and 2 fabric slots supporting 64-bit/66MHz PCI and H.110 CT bus, embedded CD-ROM and floppy drives, and 2 to 3 HDDs for RAID. Application developers will never find a better PICMG 2.16 platform with such flexible and considerable design.
Dimensions 483.2 x 399 x 299.1 (mm, W x H x D, w/o handle)
CompactPCI Standards PICMG 2.0, 2.1, 2.5, 2.9, 2.11, 2.16
Form Factor 6U cPCI with 80mm depth rear I/O
Enclosure EIA RS-310C 19" 9U high rack-mount enclosure
Coated metal plate outer covering
Guarded power switch and reset button
Basic Alarm Module Monitors inner chassis temperature and fan status (Model dependent)
Abnormal status will generate alarm and LED warning
Alarm reset (beep silence)
LED indications show power voltage status on 5V, 3.3V, 12V and -12V
Cooling System Front-access hot-swappable fan trays for in-take and ventilation:
12V DC brushless, dual ball bearing, 5 fans for in-take and 5 fans for ventilation, Rated speed for each fan: 4000 ± 500 RPM, Rated power for each fan: 2.64W, Air flow for in-take: 241 CFM, Air flow for ventilation: 241 CFM
Rear-access hot-swappable fan module for power bank and drive bays:
12 VDC brushless, dual ball bearing, 2 fans for ventilation with 51 CFM each
Rated speed for each fan: 2800±250 RPM, Rated power for each fan: 2.9W
Disk Drive Bays Two 5.25" can support RAID and one 3.5" drive ray, built-in one silm-type CD-ROM
Power Supply Supports up to 4 in-rack 3U cPCI 8HP power modules
Supports current sharing on 5V, 3.3V, and 12V
PICMG 2.11 47-pin power interface
Available power module: cPS-H325/AC (250W) N+1 redundant each)
Safety CE, FCC class A
NEBS Designed for NEBS Level 3
Environmental
Operating Non Operating
Temperature 0 to 55°C -20 to 80°C
Humidity 5 - 95% @ 40°C non-condensing 0 - 95% @ 40°C non-condensing
Shock 1G @ 10 ms 30G @ 10 ms
Vibration 0.25 G @ 5 - 150 Hz 5G @ 5 ? 150 Hz
Altitude 15,000 ft. (4,572 m) 50,000 ft. (15,240 m)
Media Server and Signaling Gateway Media Gateway Controller Voice Portal
Streaming Server LBS/ HLR/ VLR/ SMS/ Call Center  
ELK-cPCI880
 PICMG 2.16 cPSB blade Chassis Sub-system with pre-installed redundant and hot swappable power supplies, a blade processor board (ELK-cPSBC6830V, ELK-cPSBC6860, ELK-cPSBC6820AA, ELK-cPSBC6810AA) and a switch fabric board (ELK-cPC3400F, ELK-cPC4406F, ELK-cPC6400)
All specifications within this document are subject to change without notice.