| System Architecture |
Standard ATX form factor with Dual Pentium III CPU support
All in one board with Dual Channel Ultra 160 SCSI, Dual Channel Ethernet and VGA Next generation server with industry specifica |
| CPU Support |
Intel® Dual Pentium® III CPU with 128/256K cache on die
Intel® Socket 370 FC-PGA CPU running at 100/133MHz FSB up to 1GHz
Support streaming SIMD instruction |
| Main Memory |
Support SDRAM up to 2 GB (Max.) Two direct RDRAM channels support up to 3.2 GB/s of data bandwidth 184-pin DIMM socket x 4 ECC support (single bit error correction/Multiple bit errors reporting) |
| BIOS |
Award® System BIOS Plug & Play support Advanced Power Management support Advanced Configuration & Power Interface support Jumperless for CPU FSB 4M bits flash ROM, upgradeable to 8M bits |
| Chipset |
Intel® 840 Chipset support up to 2-way configurations 64 bit and 66 MHz PCI interface 82840 x 1 Memory Controller Hub (MCH) 82801 x 1 I/O Controller Hub (ICH) 82802 x 1 Firmware Hub (FWH) 82806 x 1 64 bit PCI Controller Hub (P64H) |
| VGA |
C&T 69000 VGA controller (PCI mode) 2MB SDRAM on die Maximum Resolution, Color & Refresh Rate: - 1280x1024: 256 Colors with 60Hz Refresh Rate - 1024x768: 16bits(High color) with 85/75/60Hz Refresh Rate - 800x600: 24bits (True color) with 85/75/60Hz Refresh Rate Drivers support: Windows® 95/98/2000, Windows® NT4.0 |
| LAN |
Rear Panel 4 LAN LED (active/link x 2, speed x 2) Drivers support: DOS/Windows®, Windows® 95/98/2000, Windows® NT4.0, Netware, SCO Open Server 5.0, Linux Intel® 82559 (PRO/100 Network Connection) Single Ethernet controller x 2 10 Base T/100 Base TX support, full duplex Complied with PCI V2.1, IEEE802.3, IEEE 802.3U |
| SCSI |
Adaptec AIC 7899 Dual Channel Ultra 160 SCSI controller Brand New Ultra 160 SCSI support 160MB/s (Max.) transfer rate, up to 12 meter cable Backward compatible with Ultra Wide SCSI, SCSI II, etc. Drivers support: Windows® 95/98/2000, Windows® NT4.0, SCO Open Server 5.0 68 pin SCSI connector x 2 On board 4 pin header for LED |
| I/O Interface |
SMSC LPC47B27x Enhanced Super I/O on board SIO x 2, with 2x16C550 UARTs PIO x 1, Bi-directional, EPP/ECP support Floppy Disk controller: 5.25" 360KB/1.2MB, 3.5" 720KB/1.2MB/1.44MB/2.88MB support, 34 pin connector x 1 On chip enhanced IDE x 2, PIO up to mode 4, DMA master up to mode 2, Ultra DMA/33/66 support, total 4 E.IDE Devices support, 40 pin connector x 2 On chip keyboard, mouse controller On board USB port x 2 On board buzzer x 1 IrDA connector x 1 On board 2 pin header for I2C On board 2 pin header for reset SW, 4 pin for speaker, 5 pin for keylock and power LED |
| ACPI Function |
Soft off Wake On LAN Wake On Keyboard Wake On Ring RTC alarm wake up Intruder detect input Suspend to RAM Suspend to Disk |
| On-board Slots |
Total 6 slots, include AGPpro slot x 1, 64bit/66MHz PCI slot x 2 (reserved 2 horizontal PCI slot expand for 2U chassis) 32bit/33MHz PCI slot x 3 |
| On Board RTC |
High precision real time clock/calendar with battery back up |
IDE Interface Disk
On Module Support |
On board reserved power pin for DOM (DiskOnModule): 4MB~160MB, etc |
| System Monitor |
Winbond W83782D system monitor controller Eight voltage (For +3.3V, +5V, +12V, -12V, Vtt and Vcore x 2, Vcc2.5V) Two Fan speed (For CPU) Two temperature (For CPU) Drivers support: Windows® 95/98, Windows NT4.0/2000 |
| Power Input |
ATX power connector x 1 |
| Back Panel |
PS2 connector x 2 (for Keyboard/Mouse) USB port x 2 RJ45 connector x 2 (for LAN) 15 pin D-type connector x 1 (for VGA) 9 pin D-type connector x 2 (for SIO) 25 pin D-type connector x 1 (for PIO) LAN LED x 4 (active/link x 2, speed x 2) |
| Watchdog Timer |
1,2,4...64 seconds time-out intervals |
| Dimension |
305mm(L) x 244mm(W) |
| Power Requirements |
+3.3V: 10A +5V: 20A +12V: 500mA 5VSTBY: 1A |
| Environments |
Operating temperatures: 0°C to 60°C Storage temperatures: -20°C to 80°C
Relative humidity: 10% to 90% (Non-condensing) |
| Certification |
CE Mark, FCC Class A |
