|
|
| 현재위치 : HOME > PRODUCT > 임베디드컴퓨팅 > ATX Form Factor |
|
 |
|
|
|
|
| Industrial ATX Dual Socket 370 Pentium® III Server Board |
|
|
|
|
| System Architecture |
Standard ATX form factor with Dual Pentium III CPU support
All in one board with Dual Channel Ultra 160 SCSI, Dual Channel Ethernet and VGA Next generation server with industry specifica |
| CPU Support |
Intel® Dual Pentium® III CPU with 128/256K cache on die
Intel® Socket 370 FC-PGA CPU running at 100/133MHz FSB up to 1GHz
Support streaming SIMD instruction |
| Main Memory |
Support DDR DRAM up to 4GB (Max.), 184 pin DDR DIMM x 4
ECC support (single bit error correction/Multiple bit errors reporting) |
| BIOS |
Award System BIOS, Plug & Play support, Advanced Power Management support Advanced Configuration & Power Interface support
Jumper less for CPU FSB, 2M bits flash ROM |
| Chipset |
VIA Apollo PRO 266 Chipset (VT 8633 and VT 8233)
100/133MHz FSB support, PCI V2.2 compliant, Intel® 21150AB PCI to PCI Bridge |
| VGA |
C&T 69000 controller (PCI mode), 2MB SDRAM on die
Drivers support: Windows® 95/98/2000, Windows® NT4.0 |
| LAN |
Compliant with PCI V2.1, IEEE802.3, IEEE 802.3U
Drivers support: DOS/Windows®, Windows® 95/98/2000, Windows® NT4.0, Netware, SCO Open Server 5.0, Linux
RJ-45 connector x 2, Rear Panel 4 LAN LED (active/link x 2, speed x 2)
Intel® 82559 (PRO/100 Network Connection) Single Ethernet controller x 2
10 Base T/100 Base TX support, full duplex |
| SCSI |
Adaptec AIC 7899 Dual Channel Ultra 160 SCSI controller
Ultra 160 SCSI support 160MB/s (Max.) transfer rate, up to 12 meter cable
Backward compatible with Ultra Wide SCSI, Ultra 2 SCSI, etc
Drivers support: Windows® 95/98/2000, Windows® NT4.0, SCO Open Server 5.0, Linux
68 pin SCSI connector x 2, On board 4 pin header for LED |
| I/O Interface |
SMsC LPC 47B 272 super I/O on board, SIO x 2, with 2 x 16C550 UARTs
PIO x 1, Bi-directional, EPP/ECP support
Floppy Disk controller: 34 pin connector x 1
On chip enhanced IDE x 2, Ultra DMA/33/66/100 support, 40 pin connector x 2
On chip keyboard, mouse controller, PS/2 keyboard port x 1, PS/2 mouse port x 1
On board USB port x 4 ( 2 front 2 rear ), On board buzzer x 1 IrDA connector x 1
On board 2 pin header for I2C, GPIO (4 in 4 out)
On board 2 pin header for reset SW, 4 pin for speaker, 5 pin for keylock and power LED |
| ACPI Function |
Soft off, Wake On LAN, Wake On Keyboard,Wake On Ring,RTC alarm wake up Suspend to Disk |
| On-board Slots |
Total 6 slots, include AGP port x 1, 32bit/33MHz PCI slot x 5 (reserved 3 horizontal PCI slot expand for 2U chassis) |
| On Board RTC |
VT 8233 Internal High precision real time clock/calendar with battery back up |
IDE Interface Disk
On Module Support |
On board reserved power pin for DOM (DiskOnModule): 4MB~160MB, etc |
| System Monitor |
Winbond W83782D system monitor controller x 2
8 voltage (For +3.3V, +5V, +12V, -12V, Vtt , Vcore x 2 and V-DIMM 2.5V)
Two Fan speed (For CPU) and Three FAN Speed (For System)
Two temperature (For CPU)
Drivers support: Windows® 95/98/2000, Windows® NT4.0/2000 |
| Power Input |
ATX power connector x 1, ATX V2.03 specification AUX power connector x 1 |
| Back Panel |
PS2 connector x 2 (for Keyboard/Mouse), USB port x 2, RJ45 connector x 2 (for LAN) 15 pin D-type connector x 1 (for VGA), 9 pin D-type connector x 2 (for SIO)
25 pin D-type connector x 1 (for PIO), LAN LED x 4 (active/link x 2, speed x 2) |
| Dimension |
305mm(L) x 244mm(W) |
| Power Requirements |
+3.3V: TBD, +5V: TBD, +12V: TBD, 5VSTBY: TBD |
| Environments |
Operating temperatures: 0°C to 60°C, Storage temperatures: -20°C to 80°C
Relative humidity: 10% to 90% (Non-condensing) |
| Certification |
FCC Class A, CE approval |
|
|
|
|
|
 |
 |
| ELK- ATX6620VL2 |
ATX Dual Socket 370 Pentium® III Server Board w/VGA/Dual LAN |
All specifications within this document are subject to change without notice. |
|
|
|
