| Form Factor |
ATX 12" x 9.6" |
| CPU |
512K L2 cache on-die depend on CPU, Intel® NetBurst™ Microarchitecture support Support Intel® Pentium® 4 Processor with 533 MHz FSB, speed up to 3.06GHz+ with Hyper-Threading Technology support
Supprot Intel® Pentium® 4 Processor-M with 400 MHz FSB, speed up to 2.60GHz+ Support Intel® Celeron® Processor with 400 MHz FSB, speed up to 2.8GHz+ |
| Memory |
Support un-buffered and non-ECC only
Max. 2GB DDR 366/333 SDRAM memory, 184-pin DIMM x2
Support single-sided/double-sided DDR DIMMS
Not support double-sided x16 DDR DIMMs |
| BIOS |
Award System BIOS, 4M bits flash ROM, Plug & Play support
APM (Advanced Power Management) support
ACPI (Advanced Configuration & Power Interface) support |
| Chipset |
Intel® 82845GV chipset, Intel® 82801DB I/O Controller Hub (ICH4), FWH |
| VGA |
Intel® 82845GV chipset integrated with Graphics Controller
64MB VGA shared momery, 15-pin CRT connector x1 |
| LAN |
One Intel LAN S82562EM (PRO/100 VM Network Connection) Fast Ethernet controller and one Intel LAN S82541GI ( PRO/1000 MT Network Connection) Gigabit Ethernet controllers
Full duplex compliant with IEEE802.3x, RJ45 with LED connector x 2 |
| I/O Interface |
Super I/O ITE IT8712F and FINTEK F81216D
Serial port: SIO x4 (COM2 with 422/485 as an option), 9-pin header x3, D-Sub 9-pin x1, Parellel port: D-Sub 25-pin connector x1, support EPP/ECP
Floppy Disk Controller: 34-pin connector x1
Enhance IDE: Dual Ultra ATA33/66/100 channels, total 4E.IDE Devices support, 40-pin connector x 2
PS/2 keyboard/Mouse: Mini-DIN connector x2, GPIO (4-in/ 4-out) pin header
5-pin IrDA pin header x1, Reset SW: on-board 2-pin header
SM bus: on-board 2-pin header, USB 2.0 x 6 (connector x4 + pin header x2) |
| On-board Audio |
Audio interface: AC'97 Audio Codec ALC655
Phone jack x3 in rear side(Line-out/ Line-in/ Mic-in)
CD-in and Vedio-in pin header on board |
| On-board Slots |
32bit/33MHz PCI slot x4, ISA slot x3 |
| System Monitor |
Derived from ITE8712 super I/O
8 voltage (For +1.5V, +3.3V, +5V, -5V, +12V, Vcore, +3.3V stand-by and +5V stand-by) 3 FAN speed (1 for CPU and 2 for system), 2 temperature (for CPU and system) |
| Real Time Clock |
On-chip RTC with battery back up |
| Watchdog Timer |
1-255 seconds/minutes time-out intervals |
| Dimensions |
Extended ATX - 12" x 9.6" (305mm x 244mm) |
| Power Requirements |
TBD: 5V / +12V / +3.3V / +5Vsb/+3.3Vsb |
| Environments |
Operating temperatures: 0°C to 60°C, Storage temperatures: -20°C to 80°C
Relative humidity: 10% to 90% (Non-condensing ) |
| Certification |
CE Mark, FCC Class A |
