|
|
| 현재위치 : HOME > PRODUCT > 임베디드컴퓨팅 > ATX Form Factor |
|
 |
|
|
|
|
| Industrial ATX Intel® Pentium 4 Server Board with 533/800 MHz FSB, PCI-X Slot and Serial ATA support |
|
|
|
|
| Form Factor |
ATX 12" x 9.6" |
| CPU support |
Single mPGA478 ZIF socket
support Intel® Pentium 4 Processor with Hyper-Threading Technology, 800 MHz FSB, up to 3E GHz, 1M L2 Cache
support Intel® Pentium 4 Processor with Hyper-Threading Technology, 533 MHz FSB, up to 3.06GHz, 512KB L2 Cache
support Intel® Pentium 4 Processor, 533 MHz FSB, up to 2.80 GHz, 512KB L2 Cache support Intel® Pentium 4 Processor, 400 MHz FSB, up to 2.60 GHz, 512KB L2 Cache |
| Main Memory |
184pin DDR DIMM x 4, support max. memory up to 4GB (DDR266/333/400)
Unbuffered and ECC support, Available bandwidth up to 3.2Gbytes/s (DDR400) for single-channel mode and 6.4Gbytes/s (DDR400) in dual-channel mode |
| BIOS |
Award system BIOS, Plug & Play support, Advanced Power Management and Advanced Configuration & Power Interface support, Jumperless for CPU FSB, 4M bits flash ROM |
| Chipset |
Intel®875P / 6300ESB Chipsets, Firmware Hub (FWH), PCI V2.2 compliant |
| On-board LAN |
Intel LAN S82551QM (PRO/100 Network Connection) 10/100 Ethernet controller x 1 (co-layout with Intel LAN S82541GI (PRO/1000 MT Network Connection) Gigabit Ethernet controller)
Intel LAN S82547GI (PRO/1000 CT Network Connection) Gigabit Ethernet controller x 1 (dedicated by CSA port directly from the Intel®875P)
Compliant with PCI V2.1/2.2 IEEE802.3x
Drivers support: Windows®XP/2000/ME, Linux RedHat Pro 8.0
RJ45 with LED connector x 2, 4 x pin header for extended LAN (with LED) |
| On-board I/O |
Super I/O: Winbond W83627HF, Serial port x 4 (DB9 x 2 and 10-pin header x 2) Parallel port: DB25 x 1, Bi-directional, EPP/ECP support
USB 2.0 port x 4, Floppy disk controller: 34 pin connector x 1, 3.5" 1.44MB/2.88 MB support, IDE connector: 40-pin connector x 2, PIO up to mode 4, Ultra ATA33/66/100 support, total 4 E.IDE devices support
Serial ATA connector x 2, data transfer bandwidth up to 150MB/s, RAID 0 & 1 supported (for 2 HDD), PS/2 keyboard/mouse Mini-DIN connector x 2
GPIO (4 in 4 out) Pin header, 2-pin buzzer x 1, 2-pin power on button switch
4-pin header for SM bus (I2C), 2-pin header for reset SW |
| On-board Audio |
ALC655 (AC97 Codec), Line in x 1, Line out x 1, Mic in x 1 |
| On-board Slots |
AGP slot x 1, 64bit/66MHz PCI-X slot x 3, 32bit/33MHz PCI x 3 |
| On-board RTC |
On-Chip real time clock with battery back up |
| System Monitor |
System monitor controller derived from Winbond W83627HF
7 Voltage (For +3.3V, +5V, +12V, -12V, Vcore, 2.5V, +5V STBY)
3 Fan speed (For CPU), 2 temperature (For CPU) |
| Back Panel |
PS2 connector x 2 (for Keyboard/Mouse), USB 2.0 port x 4
RJ45 with LED connector x 2 (for LAN), 9-pin D-type connector x 2 (for Serial port) 25-pin D-type connector x 1 (for PIO), Standard Audio connector (Lin out, Line in, Mic in) |
| Watchdog Timer |
1-128 seconds time-out intervals |
| Dimensions |
305mm (L) x 244mm (W) (12" x 9.6") |
Power Source &
Power Requirements |
+3.3V: 2.1A, +5V: 12A,
+12V: 14A for Pentium 4 processor with HT support and 11A for Pentium 4 Processor +5V STBY: 1.3A |
| Environments |
Operating Temperatures: 0°C to 60°C, Storage temperatures: -20°C to 80°C,
Relative Humidity: 10% to 90% (Non-Condensing) |
| Certification |
CE Mark, FCC Class A |
|
|
|
|
|
 |
 |
ELK- ATX732L2G
|
ATX socket 478 Server Board supports Intel®Pentium 4 Processor with 10/100 LAN x 1 (Intel®82551QM) + Gigabit LAN x 1 (by CSA) |
ELK- ATX732L2G2
|
ATX socket 478 Server Board supports Intel®Pentium 4 Processor with Gbe LAN x 1 (Intel®82541GI) + Gbe LAN x 1 .. Min 50pcs/order |
All specifications within this document are subject to change without notice. |
|
|
|
