|
|
| 현재위치 : HOME > PRODUCT > 임베디드컴퓨팅 > 3.5" Form Factor |
|
 |
|
|
|
|
| 3.5" Drive Form Factor Intel Mobile Ultra Low Voltage Celeron 400~650MHz / LV Pentium III 933MHz Processor Embedded Controller w/CPU/Video/LAN/Audio/TV-out/IEEE 1394. |
|
|
|
|
| System Architecture |
3.5" Drive Form Factor |
| CPU support |
Supports Intel Mobile Ultra Low Voltage Celeron 400~650MHz processor / LV Pentium III 933MHz processor |
| Memory |
Max. 1GB DDR SDRAM, 200-pin SI-DIMM x1 |
| BIOS |
Award system BIOS, ACPI Support(ATX MODE), APM(Advanced power Management) support, 4M nits flash ROM |
| Chipset |
VIA CLE 266 100/133MHz North Bridge, and VIA VT8235 |
| LAN |
VIA VT6105 Ethernet Controller x1, Single Chip 10/100 Base TX support, full dulex,Compliant with IEEE802.3X, Boot from LAN function, Wake On LAN Functions, RJ45 with LED connector x1 |
| Audio |
AC97 ver 2.0 compliant interface from 8235, Sound AC-97 Audio Interface CODEC:VT 1616, Audio interface: External Phone Jack: Microphone in, Speaker out, Line in |
| VGA |
VIA 8623 Integrated Graphics UniChrome AGP 8x 2D/3D graphics engine, 8/16/32/64 MB frame buffer usingsystem memory, 15-pin D-Sub VGA output, TTL LCD Interface x 1, Dual Independent Display, TV out(Pin Header) |
| On Board USB 2.0 |
USB 2.0 compliant interface from VT8235, USB connector x 6 (two directly ouput, 4 by Jst Box Header) |
| IEEE1394 |
VIA Fire II VT6307S, IEEE 1394 port x3 |
| IDE Interface |
VIA VT8235 South Bridge Integrated Ultra DMA-33/66/100/133 master mode EIDE controller, Support ultraDMA 33/66/100 IDE: 44-pin connector x1, Internal compactFlash socket x1, BIOS have the item to Enable / Disable DMA 33 or DMA 66/100 mode |
| I/O Interface |
SIO x 2, with 2x16C550 UARTs, 10 pin header(2.0mm) x 2, 6pin mini DIN connector x 1, for PS/2 keyboard/mouse, PIO , 26-pin connector support EPP/ECP, Slim FDD controller : 26-pin connector x 1, FIR : 5-pin header x 1, On Board buzzer x 1, On Board 3 pin header for 12C, one pin for GND, On Board 2 pin header for Reset SW, On Board 2 pin Power LED Header, 2 Pin IDE Active LED Header |
| Dimensions |
143mm(L) x 102mm(W) |
| Real Time Clock |
On chip RTC with battery back up, and External Li-Ion battery x 1 |
| Watchdog Timer |
Watchdog timout can be programmable by Software |
| System Monitor |
Derived from Super I/O (VT1211) to support system monitor, Drivers support : Windows 98/2000, Windows NT4.0, 5 voltage(For +3.3V, +5V, 2.5V,Vcore), Fan speed for CPU, Two Temperature(CPU and System) |
| Power Source & Power Requirements |
AT Mode : Power Cable : Two Big 4P to 6P, ATX Mode : Power Cable - ATX Power Connector to 6P (5V,GND) + 3pin(+5Vsb, PS_ON, GND), On Board 3 pin Jst connector to receive the 5Vsb, PS_ON, GND, 2-pin Pin Header for Power Switch Button, 3-pin Jumper set to ATX mode |
| Environments |
Operating Temperatures: 0°C to 60°C, Storage Ttemperatures: -20°C to 80°C
Relative humidity: 10% to 90% (Non-condensing) |
| Certification |
CE Mark, FCC Class A |
|
|
|
|
|
|
|
 |
| ELK-EPC366LV6 |
3.5" ULtra Low Voltage Embedded Board with on board Intel Mobile ULV 650MHz processor |
| Accessory Options |
below list |
| ELK-60233TVQ03 |
TV out Cable , L:250+-10mm, 2x3, 2.54Pitch |
| ELK-60233USB07 |
USB Cable , L: 200mm |
| ELK-60233VED02 |
S Vedio/RCA Cable, L:100mm |
All specifications within this document are subject to change without notice. |
|
|
|
