|
|
| 현재위치 : HOME > PRODUCT > 임베디드컴퓨팅 > 5.25 Form Factor |
|
 |
|
|
|
|
Cost-Effective GHz Embedded Computing
ASAN ST, a leading worldwide provider of applied computing platforms for embedded, industrial and communications market segments, announced today that its VIA C3-based embedded platforms have reached the GHz milestone.
"The High Performance Fan-less PIII Level Appliances Ready-To-Go"
ASAN ST today announced a series of its "Fan-less" Ready-To-Go Network Appliance solutions based on the P®III compatible Eden platforms. |
|
|
|
|
| System Architecture |
5.25" Drive Form Factor and PCI V2.2 compliant |
| CPU Support |
128K/L1 and 64K/L2 cache memory on-die Supports VIA Eden 667MHz and up to 1GHz up with 100/133MHz FSB |
| Memory |
Max 512 MB memory, 168-pin DIMM x 1 |
| BIOS |
Award system BIOS, APM(Advanced Power Management) supported, 4M bits flash ROM |
| Chipset |
VIA 8601A 100/133MHz North Bridge, VIA VT82C686B PSIPC PCI SUPER-I/O integrated peripheral controller, and PCI V2.2 compliant |
| LAN |
RealTek RTL8139C Ethernet Controller x 3 or Intel® 82559 LAN port x 3, 10/100 Base T/TX support, full duplex, Boot from LAN function, and RJ45 with LED connector x 3 |
| VGA |
VIA Apollo PLE133 Graphics Controller, 64-bit Single Cycle 2D/3D Graphics Engine, Supports 2 to 8 Mbytes of Frame Buffer, Real Time DVD MPEG-2 and AC-3 playback, Integrated 24-bit 230MHz true color DAC extended screen resolutions up to 1600 x 1200, Allows external TMDS transmitter (DVI) for advanced panel interfaces, 15-pin D-Sub VGA Output; 50-pin connector x 1; Optional TMDS Module |
| Solid State Disk |
One socket be reserved for DOC expansion from 2MB~288MB |
| I/O Interface |
SIO x 2, with 2x16C550 UARTs, 10-pin header x 1, D-Sub x 1, PIO x 1, bi-directional, 26-pin connector EPP/ECP support, Floppy Disk controller: 34-pin connector x 1, Support UltraDMA-33/66/100 IDE: 40-pin connector x 1, 44-pin connector x 1, Optional CompactFlash module support, Support DOM: Disk On Module on the 44-pin IDE for option, PS/2 keyboard/mouse : 6-pin mini DIN connector x 1, USB port x 2, Buzzer x 1, Digital I/O: 4bit TTL input, 4bit TTL output, I2C: 2-pin header x 1, IrDA: 5-pin header x 1, Reset SW: 2-pin header x1, ATX power SW: 2-pin header x1, Power cable connected to panel(5V or 3V): 3-pin header x1, AC97 interface for optional audio module |
| Bus Expansion |
One PCI Slot |
| Dimensions |
203mm(L) x 146mm(W) |
| Real Time Clock |
On-chip RTC with battery back up and External Li-lon battery x 1 |
| Watchdog Timer |
Watchdog timeout can be programmable by Software from 0.5 |
| System Monitor |
Two temperature, Drivers support: Windows® 95/98/2000, Windows® NT4.0, Derived from super I/O to support system monitor, 5 voltage (For +3.3V, +5V, +12V, Vcore and Vtt), Two fan speed (For CPU and Chassis) |
| Power Source & Power Requirements |
Accessory Power Converter Cable:
- AT Power Supply: Two 4P to 6P
- ATX Power Supply: 6P+ 2-pin power SW |
| Environments |
Operating Temperatures: 0°C to 60°C, Storage Temperatures: -20°C to 80°C
Relative humidity: 10% to 90% (Non-condensing) |
| Certification |
CE Mark and FCC Class A |
|
|
|
|
|
|
|
 |
| ELK-EPC563I |
5.25" Embedded board with on-board VIA C3 800MHz CPU/VGA AGP 4X/ 3 ports Intel® 82559 LANs |
| ELK-EPC563I-1 |
5.25" Embedded board with on-board VIA C3 1GHz CPU/ VGA AGP 4X/ Intel® 82559 LANsx3 |
| ELK-EPC563I-LP6 |
5.25" Embedded board with on-board low power VIA Eden 667MHz CPU fanless solution/ VGA AGP 4X/ 3 ports Intel® 82559 LANs |
| ELK-EPC563R |
5.25" Embedded board with on-board VIA C3 800MHz CPU/VGA AGP 4X/ 3 ports RTL8139C LANs |
| ELK-EPC563R-1 |
5.25" Embedded board with on-board VIA C3 1GHz CPU/ VGA AGP 4X/ RTL8139C LANx3 |
| ELK-EPC563R-LP6 |
5.25" Embedded board with on-board low power VIA Eden 667MHz CPU fanless solution/ VGA AGP 4X/ 3 ports RTL8139C LANx3 |
All specifications within this document are subject to change without notice. |
|
|
|
