ÇöÀçÀ§Ä¡ : HOME > PRODUCT > ÀÓº£µðµåÄÄÇ»ÆÃ > 5.25 Form Factor
EBX Form Factor(5.25") Low Power VIA Eden or C3 Processor EBX SBC ELK-EPC566
On-board VIA C3 400MHz ~ 1GHz+ processor with 100/133MHz FSB
Support DDR 200/266 MHz SDRAM
Dual 10/100 base-T Fast Ethernet
CFD storage devices support
USB 2.0 x 6
PC 104 plus
   
   
The ELK-EPC566,a new embedded CPU board, is based on VIA C3 1 GHz or Eden 667 MHz ultra low power CPUs, and the CLE 266 chipset supporting the DDR memory. ASAN ST announced today a new embedded CPU board, the ELK-EPC566, based on VIA C3 1 GHz or Eden 667 MHz ultra low power CPUs, and the CLE 266 chipset supporting the DDR memory.
System Architecture 5.25" Drive Form Factor and PCI V2.2 compliant
CPU Support On-board VIA C3 Processor EBGA Package with 128KB Level 1 and 64KB Level 2 Cache 400 ~1000 Mhz (1G standard product) CPU on board, And feature VIA C3 series CPU with EBGA Package CPU FSB 100/133MHz
Memory One 184-pin DIMM. Support Max memory size to 1 GB
BIOS Award system BIOS, Advanced Power Management support(Optional) ACPI Support , 4M bits flash ROM
Chipset VIA 8623 (CLE266) 100 /133 MHz North Bridge VIA VT8235 PCI V2.2 complied
LAN LAN VIA Ethernet Controller x 2, VT6105 Dual Chip 10 /100 Base TX support, full duplex Boot From LAN function, Drivers support: DOS/ Windows, Windows 95/98/2000, Windows NT, Netware, SCO Open Server 5.0, Linux 7.2 or later, FreeBSD Interface: RJ45 connector x 2
Audio AC97 ver. 2.0 compliant interface from VT8235 Sound AC-97 Audio Interface CODEC: VT: 1616
Audio interface: Line in (Internal), Microphone in, Speaker out (with Amplifier)
VGA(Hardware Disable is needed) VIA 8623 S3 Graphics UniChrome AGP8x 2D/3D graphics engine, Optimized Shared Memory Architecture (SMA), 8/16/32/64 MB frame buffer using system memory, Single cycle 128-bit (2D), 1 Pipe, 2 Texture, dedicated (3D) architecture, Full internal AGP 8X performance, Next generation, 128-bit 2D graphics engine, High quality DVD video playback, 2D/3D resolutions up to 1920x1440, Extensive LCD Support, 18/24 TTL TFT flat panel interface support (DF-13 connector 40 pin X1) LVDS for option (through Daughter board), 12 bit DVI 1.0 compatible interface for driving of flat panel using external TMDS encoder, Support for panel resolutions up to 1600x1200, Drivers support¢®GWindows 95/98/2000, Windows NT4.0, Win XP, Linux, 16 Pin VGA Output (box header 2.00mm 8 x 2 pin), DVI 12 bit Interface 20 pin box header Connector x 1, 18/24 bit TTL LCD Interface (DF-13 connector 40 pin X1)
Solid State Disk Internal CompactFlash socket x 1
I/O interface Power Header x 1 for LCD Panel Backlight, COM reserved the RING pin to power Touch Screen LCD ( jumper select 5 or 12V or ring), 3 pin Power Connector for CPU FAN and Chassis FAN, 2 pin IDE Active LED Header, SIO' 4, with 4x16C550 UARTs, 40 pin 2.0mm box header X 1 ; one for RS-422/485, PIO x 1, bi-directional, EPP/ECP support, 26 pin connector x1, Floppy Disk controller¢®:FDC pin connector x1, 2 x 4 pin header connector x1, for PS/2 keyboard/mouse, On-board USB port x 6, Jst 2.0mm x 3, On-board buzzer x1, Digital I/O: 4 bit TTL input and 4 bit TTL Output 2x4 2.00mm pin header, On-board 3 pin header for I2C, one pin for GND, On-board 5 pin header for IrDA Tx/Rx, On-board 2 pin header for Reset SW, On-board 2 pin header for power SW (ATX Mode)
Real time clock On chip RTC with battery back up and External Li-lon Battery x 1
Watchdog Timer Watchdog timeout can be programmable by Software from 0.5 second to 64 Second.
Bus Expansion One 32 bit/33MHZ PCI Slot and PC/104-Plus
System Monitor Derived from super I/O to support system monitor, 5 voltage (For +3.3V, +5V, +12V, Vcore and+2.5V), Monitor CPU fan speed and temperature, Drivers support: Windows¢ç 95/98/2000, Windows¢ç NT4.0
Power Source &
Power requirements
20 pin power inport connector (standard ATX connector)
Dimensions 203mm(L) x 146mm(W)
Environments Operating temperatures: 0¡ÆC to 60¡ÆC, Storage temperatures: -20¡ÆC to 80¡ÆC
Relative humidity: 10% to 90% (non-condensing)
Certification CE Mark and FCC Class A
ELK-EPC566 5.25" VIA Embedded Board with on board 1GHz CPU /2 x LAN/VGA/Audio
ELK-29E0056600 Wiring Kit for ELK-EPC566 (Optional)
All specifications within this document are subject to change without notice.