현재위치 : HOME > PRODUCT > 임베디드컴퓨팅 > 5.25 Form Factor
EBX Form Factor(5.25") Low Power VIA Eden or C3 Processor EBX SBC ELK-EPC569
On-borad Low power VIA Eden 667MHz or C3 VIA 800/1GHz+ processor with 100/133MHz
Max. 512MB SDRAM, 168-pin DIMM x 1
VIA Twister T8606/686B chipsets
4X AGP VGA, 2D/3D graphic, LVDS/TTL Panel interface
Realtek 8139C 10/100Base-T LAN
AC 97 ver. 2.0 Audio
COM port x 4
PC 104 and Digital I/O
Cost-Effective GHz Embedded Computing
ASAN ST, a leading worldwide provider of applied computing platforms for embedded, industrial and communications market segments, announced today that its VIA C3-based embedded platforms have reached the GHz milestone.
"The High Performance Fan-less PIII Level Appliances Ready-To-Go"
ASAN ST today announced a series of its "Fan-less" Ready-To-Go Network Appliance solutions based on the P®III compatible Eden platforms.
System Architecture 5.25" Drive Form Factor and PCI V2.2 compliant
CPU Support Support VIA Eden 667MHz and up to 1GHz up with 100/133MHz FSB, 128K/L1 and 64K/L2 cache memory on-die
Memory Max 512 MB memory, 168-pin DIMM x 1
BIOS Award system BIOS, APM(Advanced Power Management) supported, and 4M bits flash ROM
Chipset VIA 8606 (Twister T) 100/133MHz North Bridge, VIA VT82C686B PSIPC PCI SUPER-I/O integrated peripheral controller, and PCI V2.2 compliant
LAN Realtek RTL 8139C Ethernet LAN port x 2, Single Chip 10/100 Base TX support, full duplex, and Boot from LAN function
Audio VT82C686B and AC97 ver. 2.0 compliant interface, Multi-stream Direct Sound and DirectSound 3D acceleration, Audio interface: CD audio-in / Line-in (Internal), Microphone-in, Speaker-out (with Amplifier)
VGA Full internal AGP 4X performance, Next generation, 128-bit 2D graphics engine, High quality DVD video playback, 2D/3D resolutions up to 1920x1440, Extensive LCD Support, 36-bit DSTN/TFT flat panel interface with 256 gray shade support, Integrated 110MHz LVDS interface, Support for all resolutions up to 1600x1200, Drivers support: Windows® 95/98/2000, Windows® NT4.0, Linux, 15Pin D-Sub VGA Output, LVDS Interface Connector x1, TTL LCD Interface Connector x 1, VIA 8606 Integrated Savage4 2D/3D/Video Accelerator, Optimized Shared Memory Architecture (SMA), 8/16/32MB frame buffer using system memory, Single cycle 128-bit 3D architecture
CompactFlash Internal CompactFlash socket x 1
I/O interface Serial COM port16C550 UART x 4, 40-pin 2.0 header with housing x 3; RS422/485 x 1
Parallel: EPP/ECP support, 26 pin connector x 1
FDD: 34-pin connector x 1
HDD: 40-pin connector x 1; UltraDMA-33/66/100 IDE support
LAN: RJ45 with LED connector x 2
PS/2 keyboard/mouse: 6-pin mini DIN connector x 1
USB port x 2, Buzzer x 1, Digital I/O: 4-bit TTL input, 4-bit TTL output, I2C: 3-pin header
IrDA: 5-pin header, Reset SW: 2-pin header, 4-pin header for power SW, COM 3 reserved the RING pin to power Touch Screen LCD (jumper select 5 or 12V or ring), 3-pin power connector for CPU fan, 2-pin IDE active LED header
Real time clock On-chip RTC with battery back up, and External Li-lon Battery x 1
Watchdog Timer Watchdog timeout can be programmable by Software from 0.5 to 64 second
Expansion One PCI Slot and PC/104
Dimensions 203mm(L) x 146mm(W)
Power Source &
Power requirements 		Accessory power converter cable: - AT Power Supply: Two 4P to 6P - ATX Power Supply: 6P+ 2- pin power SW
Environments Operating temperatures: 0°C to 60°C, Storage temperatures: -20°C to 80°C
Relative humidity: 10% to 90% (non-condensing)
Certification CE Mark and FCC Class A
ELK-EPC569 5.25" embedded board with on-board VIA C3 800MHz CPU
ELK-EPC569-1 5.25" embedded board with on-board VIA C3 1GHz CPU
ELK-EPC569LP6 5.25" Ultra low power/ Fanless embedded board with VIA Eden 667MHz on-board
All specifications within this document are subject to change without notice.