| System Architecture |
Full size SBC with PCI/ISA Golden finger Intel® Socket 370 Celeron™/Pentium® III/New Pentium® III (0.13μ process) with 66/100/133MHz FSB PCI V2.1 compliant PICMG 1.0 (Rev.2.0) compliant |
| CPU Support |
Intel® Socket 370 FC-PGA Celeron™/Pentium® III/New Pentium® III (0.13μ process) CPU with 128/256K cache on die, CPU running at 66/100/133MHz FSB up to 1.26GHz or above Support streaming SIMD instruction |
| Main Memory |
Support SDRAM up to 512MB (Max.), without ECC and Non-Registered 168 pin DIMM socket x2 Support 100/133MHz SDRAM interface |
| BIOS |
Award System BIOS Plug & Play support Advanced Power Management support Advanced Configuration & Power Interface support Jumperless for CPU FSB 2MB flash ROM, upgradeable to 4MB |
| Chipset |
Intel® 815E B Step chipsets 82815 x1 Graphics and Memory Controller Hub (GMCH) 82801 x1 I/O Controller Hub (ICH2) 82802 x1 Firmware Hub (FWH) ITE 8888F x1 PCI to ISA Bridge |
| On-board LAN |
Dual channel Ethernet support Intel® 82801 (ICH2) chipset integrated LAN controller Intel® 82559 (PRO/100 Network Connection) Single Ethernet controller Alert-on-LAN by Intel® 82801 (ICH2) 10 Base T/100 Base TX support, full duplex Compliant with IEEE802.3, IEEE 802.3U Drivers support: DOS/Windows®, Windows® 95/98/2000, Windows® NT4.0, Netware, SCO Open Server 5.0, Linux RJ45 connector x 2 |
| On Board proprietary PCI interface |
Reserved 32bit PCI interface for ELK-EKSCSI/EKSCSI2/EKSCSI160D module |
| On-board VGA |
Intel® 82815 (GMCH) chipset integrated with Graphics controller Hardware motion compensation assist for software MPEG/DVD decode 15 pin CRT connector x1 Optional TFT LCD/DSTN LCD/CRT control module through proprietary connector |
| On Board optional VGA |
ATI Rage Mobility M4 3D VGA accelerator. 4X AGP Fully PC 98 and PC 99 Compliant Integrated 16MB of SDR Memory 15 pin CRT connector x1, DVI interface connector x1 |
| On-board I/O |
ITE 8712 Enhanced Super I/O on board SIO x2, with 2x16C550 UARTs, 10 pin header x2, Optional RS422/485 x1 PIO x1, bi-directional, EPP/ECP support, 26 pin connector x1 Floppy Disk controller: 5.25" 360KB/1.2MB, 3.5" 720KB/1.2MB/1.44MB/2.88MB support, 34 pin connector x1 On chip enhanced IDE x 2, PIO up to mode 4, DMA master up to mode 2, Ultra DMA/66/100 support, 40 pin connector x 2, total 4 E.IDE devices support On chip Keyboard, mouse controller, 5 pin connector x 1(for other keyboard); 6 pin mini DIN connector x1, for PS/2 keyboard/mouse On board USB port x4 (6 pin header x2) On Board buzzer x1 On board 2 pin header for I2C On board 5 pin header for IrDA On Board 2 pin header for reset SW, 4 pin for speaker, 5 pin for keylock, 2 pin power SW |
| ACPI Function |
Soft Power off Wake On LAN Wake On Keyboard Wake On Ring RTC alarm wake up |
| On Board Solid State Disk Socket |
On board reserved socket for DOC of M-system : 2MB~288MB, etc Power header beside IDE connector to support DOM |
| System Monitor |
Derived from Super IO ITE 8712 to support system monitor. 8 voltage (For +3.3V, +5V, -5V , 5V STBY, +12V, -12V, and Vcore x2) One Fan speed (For CPU) Two temperature Drivers support: Windows® 95/98/2000, Windows® NT4.0, Linux |
| Bracket Connector |
PS/2 connector x1 (for Keyboard/Mouse) RJ45 connector x2 (for LAN) 15 pin D-type connector x1 (for VGA) |
| ISAMAX Support |
Maximize ISA signals to support ISA cards up to 20 |
| Watchdog Timer |
1, 2, 4... 64 seconds time-out intervals |
| Dimensions |
338.58mm(L) x 122mm(W) |
| Power Requirements |
Voltage Maximum +5V 15A -5V 1A +12V 1A -12V 1A +5Vsb 1.5A |
| Environments |
Operating temperatures: 0°C to 60°C, Storage Temperatures: -20°C to 80°C
Relative humidity: 10% to 90% (Non-condensing) |
| Certification |
CE Verification FCC Class A |
