현재위치 : HOME> PRODUCT> 산업용컴퓨팅> SKD Platform> Mid-Range SBC
Full-Size Single Board Computers ELK-SBC710VL Series
Socket 478 for Intel® Pentium® 4/ Celeron® processor up to 2.6GHz+ with 400MHz FSB
Intel® 845 Chipset
Max. 3GB SDRAM memory in 3 DIMM slots
ATI Rage 128 Pro AGP 4X(1.5V) VGA controller with 16MB memory
Intel® 82540EM(PLC) PHY 10/100Mbps fast Ethernet
RS232 x2/ USB port x2
ASAN ST announced the immediate delivery of its three brand new P4 based SBCs. The ELK-SBC712VL2G, ELK-SBC715VL2G, and ELK-SBC710VL-3G. The ELK-SBC710VL-3G is the extended model of ELK-SBC710VL, supporting the record high memory size-3 GB.
System Architecture Full size SBC with PCI/ISA Golden finger, Socket 478 Intel® Pentium® 4 processor with system bus at 400MHz, AGP 2.0 compliant, PCI V2.0 compliant, PICMG 1.0 (Rev. 2.0) compliant
CPU Support Intel® Pentium® 4 processor with 256K cache on die, Socket 478 CPU running 400MHz system bus, CPU speed up to 2GHz or above
Main Memory 168-pin DIMM x3 Support Max. memory size to 3GB (Ready for ELK-SBC710VL-3G), ECC support (single bit error correction/Multiple bit errors reporting), No Registered DIMM Support
BIOS Award System BIOS, Plug & Play support, Advanced Power Management support, Advanced configuration & Power Interface support, 4M bits flash ROM
Chipset Intel® 845 Chipset, Intel® 82801 x1 I/O Controller Hub (ICH2), Intel® 82802 x1 Firmware Hub (FWH), PCI V2.2 compliant
On-board LAN ICH2 embedded MAC with Intel® 82562EM(PLC) (PRO/100 VM Network Connection) PHY 10/100 Ethernet controller, single Chip 10/100 Base T/TX x 1 support, full duplex, Compliant with IEEE 802.3X, Drivers support: DOS/Windows®, Windows® 95/98/2000, Windows® NT, Netware 5.0, SCO Open Server 5.0, Linux, RJ45 with LED connector x1, Support Remote Monitoring (Alerting on LAN)
On-board VGA ATI Rage 128 Pro (Ultra 4XL) VGA Controller, 1.5V AGP 4X interface, 16MB VGA Memory on board, Fully PC98 and PC99 Compliant ,15 pin CRT controller x1, 20 pin DVI connector x1
On Chip I/O (ICH2) ITE 8712F-A Server I/O, SIO x2, with 2 x 16C550 UARTs, 10 pin header x1, D-Sub 9 pin x1, PIO x1, bi-directional, EPP/ECP support, 26 pin connector x1, Floppy Disk controller: 34 pin connector x1, 6 pin mini DIN connector x1, for PS/2 keyboard/mouse, 5 pin connector x1 (for external keyboard), On board buzzer x1, GPIO (4 in 4 out), On board 2 pin header for I2C, On Board 2 pin header for reset SW / 2 pin for IDE active LED / 2 pin ATX power SW, One 3 pins power header for 3 pins Power Cable connect to Backplane Board to support ATX Power On function, On board 4 pin Additional Power Source Input
System Monitor Derived from Super IO ITE 8712F-A to system monitor, 8 voltages (For +1.8v, +3.3V, +5V, -5V, +12V, -12V, Vcore and Vcc5V Stand-By), One Fan speed (For CPU), Two for System Fan, 3 temperatures (one for CPU, the others for system)
ACPI Function Soft Power off, Power On LAN, Power On Keyboard, Power On Ring
Real Time Clock On chip RTC with battery back up, External Li Battery x1
Watchdog Timer Watchdog timeout can be programmable by Software from 1~64 seconds
On Board Bus Expansion On Board ASAN ST proprietary 32bit PCI interface for ASAN ST EK Upgrade Module
PCI to ISA Bridge & ISAMAX Support ITE 8888F x1 PCI to ISA Bridge, Provide 64mA high driving capability to maximize ISA signals for support ISA cards up to 20 on the backplane ISA Slot
Dimensions 338.58mm(L) x 122mm(W)
Power Requirements +5V: 10A (Max.) +12V: 10A (Max.) -12V: 50mA (Max.)
Environments Operating temperatures: 0°C to 60°C, Storage temperatures: -20°C to 80°C
Relative humidity: 10% to 90% (Non-condensing)
Certification CE approval FCC Class A
ELK-SBC710VL Full-size Socket 478 Intel® Pentium® 4 Processor 32bit/33MHz CPU Card w/VGA/LAN
ELK-SBC710VL-3G Full-size Socket 478 Intel® Pentium® 4 Processor 32bit/33MHz CPU Card w/VGA/LAN/Max 3GB memory support
All specifications within this document are subject to change without notice.