|
|
| 현재위치 : HOME> PRODUCT> 산업용컴퓨팅> SKD Platform> Mid-Range SBC |
|
 |
|
|
|
|
| ASAN ST announced the immediate delivery of its three brand new P4 based SBCs. The ELK-SBC712VL2G, ELK-SBC715VL2G, and ELK-SBC710VL-3G. The ELK-SBC710VL-3G is the extended model of ELK-SBC710VL, supporting the record high memory size-3 GB. |
|
|
|
|
| System Architecture |
Full size SBC with PICMG (PCI+ISA) Golden finger, AGP 2.0 compliant, PCI V2.2 compliant, PICMG 1.0 (Rev.2.0) compliant |
| CPU Support |
Intel® Pentium® 4 processor with 256K/512K L2 cache on die, Socket 478 CPU featuring 400MHz/533MHz system bus, CPU speed up to 2.4GHz or above |
| Main Memory |
DDR DIMM x 2 Support Max Memory size up to 2GB (DDR200/DDR266), ECC support (single bit error correction/Multiple bit errors reporting), Only support for (No Registered) DIMM |
| BIOS |
Award System BIOS, Plug & Play support, Advanced Power Management support, Advanced configuration & Power Interface support 2/4M bits flash ROM |
| Chipset |
Intel® 845E (MCH), Intel® 82801x 1 I/O Controller Hub (ICH2), Firmware Hub (FWH) 4M bits flash ROM x1, PCI V2.2 compliant |
| On-board LAN |
Intel® 82559 (PRO/100 Network Connection) Ethernet controllerx2 for ELK-SBC712VL2, (Intel® 82559 controller x1 +Intel® 82540 controller x1) for ELK-SBC712VL2G, 10 Base T/100 Base TX support, full duplex; Intel® 82540 support for 10 Base T/100 Base TX /(1000Base-T for ELK-SBC712VL2G only), Compliant with IEEE802.3, IEEE 802.3u, IEEE802.3x, IEEE802.3y, IEEE802.3ab, Drivers support: DOS/Windows® , Windows® 95/98/2000, Windows® NT, Netware 5.0, Linux, RJ45 with LED connector x 2 |
| On-board VGA |
ATI M7-CSP VGA Controller, 1.5V AGP 4X Interface, 32MB VGA Memory on die, Fully PC 98, PC 99, PC 2001 Compliant, 15 pin CRT connector x1, DVI (TMDS) box header x1, TV-out pin header x1, Support dual independent display (DVI/CRT, DVI/TV, CRT/TV) |
| On Chip I/O (ICH2) |
On board USB port x 2, Ultra DMA33/66/100 support, 40-pin connector x 2. Two pins power connector for DOM (Disk On Module) |
| On Board I/O |
ITE 8712F-A Super I/O, SIO x 2, with 2 x 16C550 UARTs, 10-pin header x 2, PIO x 1, bi-directional, EPP/ECP support, 26-pin connector x 1, Floppy Disk controller: 34-pin connector x 1, 6-pin mini DIN connector x 1, for PS/2 keyboard/mouse, 5-pin connector x 1(for external keyboard), On Board buzzer x 1, GPIO (4 in 4 out), On board 2-pin header for reset SW / 2-pin for IDE active LED / 2-pin ATX power SW, One 3-pin power header for 3-pin Power Cable connect to Backplane Board to support ATX Power On function. On board 4-pin Additional Power Source Input, AC97 output, 10-pin header x 1 |
| System Monitor |
Derived from Super IO ITE 8712F-A to support system monitor. 8 voltage (For+1.8V, +3.3V, +5V, -5V, +12V, -12V, Vcore and Vcc5V Stand-By), One Fan speed for CPU, Temperature x 2 (one for CPU internal use, another for external system use) |
| ACPI Function |
Soft Power off, Power On by LAN, Power On by Keyboard, Power On by Ring |
| Real Time Clock |
On chip RTC with battery back up and External Li Battery x 1 |
| Watchdog Timer |
Watchdog timeout can be programmable by Software from 1, 2, 4, 8, 16, 32, 64 seconds |
| PCI to ISA Bridge & ISAMAX Support |
ITE 8888Fx 1 PCI to ISA Bridge, Provide 64mA high driving capability to maximize ISA signals for support ISA cards up to 20 on the backplane ISA Slot. |
| Dimensions |
338.58mm(L) x 122mm(W) |
| Power Requirements |
Voltage Maximum +5V 10A +12V 12A -12V 500mA |
| Environments |
Operating temperatures: 0°Cto 60°C Storage temperatures: -20°C to 80°C
Relative humidity: 10% to 90% (Non-condensing) |
| Certification |
CE approval FCC Class A |
|
|
|
|
|
|
|
 |
| ELK-SBC712VL |
Full-sized Socket 478 Intel®Pentium® 4 processor w/VGA/DDR/Dual LAN (Intel® 82559 x2) |
| ELK-SBC715VL2G |
Full-sized socket 478 Intel®Pentium® 4 processor w/VGA/DDR/Dual LAN (Intel® 82559 + Intel® 82540EM) |
All specifications within this document are subject to change without notice. |
|
|
|
_150.jpg)
