| CPU Support |
Intel ® Pentium ® 4 processor at 2.0GHz to 2.8GHz*
Intel ® Celeron ® processor at 2.0GHz to 2.5 GHz*
*higher speeds as available |
| Chipset |
The Intel ® 845-E chipset provides support for a faster 400/533MHz system bus, DDR200/266 memory and dual USB 2.0 compatible interfaces |
| Bus Speed |
ISA:16-bit/8MHz, PCI: 32-bit/33MHz, System/FSB: 400/533MHz |
| Bios (Flash) |
AMIBIOS8 with built-in advanced CMOS setup for system parameters, peripheral management for configuring on-board peripherals, PCI-to-PCI bridge support and PCI interrupt steering. Supports flash devices for BIOS upgrading via floppy interface. Also provides integrated support for USB mass storage devices such as USB CD-ROM , CD-RW , etc. Custom BIOSs are available upon request. |
| Cache Memory |
The Intel ® Pentium ® 4 processor options on the ELK-SBC6053-107 support a 512K integrated on-die Advanced Transfer Cache (L2). The cache is an 8-way set associative cache running at full processor core frequency.
The Intel ® Celeron ® processor supports a 128K integrated on-die Advanced Transfer Cache (L2).
Both processors include a 12K level one (L1) Execution Trace Cache and 8K L1 data cache. |
| Main Memory |
Double Data Rate (DDR) memory improves memory data speeds demanded in data-intensive applications. The DDR200/266 interface is a single channel interface coming off the Memory Controller hub and terminating at two DIMM module sockets. The DIMM sockets can be independently populated with either PC1600 or PC2100 unbuffered memory modules. The memory interface supports auto detection of memory up to 2GB. The bandwidth of the DDR200/266 memory interface is 1600MB/s or 2100MB/s. |
Ultra160 SCSI
Interface |
The Ultra160 SCSI interface uses an Adaptec SCSI controller that supports SCSI device data transfer operations up to 160MB/s. The interface complies with the SPI-3 standard and is compatible with both Single-ended and Low Voltage Differential (LVD) SCSI I/O. Software drivers are available for most popular operating systems. |
| PCI Bus Interface |
The PCI bus interface supports a 32-bit PCI backplane interface running at a 33MHz bus speed. |
ISA Bus Interface
|
The ELK-SBC6053-107 provides a 16-bit ISA bus interface to the backplane for legacy ISA slots. |
| System hardward Monitor |
The Winbond W83783S chip supports hardware monitoring. The functions monitored are voltage, fan speed and temperature. The ELK-SBC6053-107 hardware monitor driver allows the user to program the monitor limits to provide a trigger point for the application software. This allows the application program to monitor these trigger points in order to send system alert messages or perform corrective action. |
| Floppy Drive Interface |
Supports up to two floppy disk drives in combinations of 360K to 2.88MB. |
| Super XGA Video Interface |
The Intel ® 69030 video interface has 4MB of on-chip memory and supports pixel resolutions up to 1280 x 1024. Software drivers are available for most popular operating systems |
| Serial Interface |
The Super I/O controller supports two full-function serial ports with independently programmable baud rates. The controller has two high-speed , NS16C550 compatible UARTs with Send/Receive 16-byte FIFOs. The IRQ for each serial port has BIOS selectable addressing. |
| Dual Ethernet Interfaces |
There are dual Ethernet LAN ports on the ELK-SBC6053-107. LAN Port 1 functions as a traditional 10/100Base-T port, while LAN Port 2 offers Gigabit (1Gb/s) connectivity in addition to the traditional 10/100Base-T interface. RJ-45 connectors located on the I/O bracket provide the mechanical interface to the Ethernet networks. |
| USB Interfaces(Dual) |
The ELK-SBC6053-107 supports two high-speed USB 2.0 ports for data transfers up to 480Mbit/sec. It also supports USB 1.1 devices for data transfers at 12 or 1.5Mbit/sec. The Universal Serial Bus (USB) is an interface allowing for connectivity to many standard PC peripherals via an external port. |
Eide Ultra ATA/100 Interfaces(Dual)
|
Dual high-performance PCI Bus Master EIDE interfaces are capable of supporting up to two IDE disk drives each in a master/slave configuration. The interface supports Ultra ATA/100 with synchronous ATA mode transfers up to 100MB per second. |
| Wachdog Timer |
The programmable watchdog timer provides a system reset with a total range of 30ms to 60 seconds. The programmable increments of the watchdog are 30ms, 10s and 60s. |
| Enhanced Bi-Directional Parael Interface |
The parallel port interface is compatible with IBM PC/XT ® , PC/AT ® , PS/2™, Enhanced Parallel Port (EPP1.7, EPP1.9) and Extended Capabilities Port (ECP) modes of operation. Both the EPP and ECP modes are IEEE 1284 compliant. The parallel port has BIOS selectable addressing. |
Keyboard and PS/2 Mouse Interfaces
|
The mini DIN connector located on the I/O bracket provides an external interface for a PS/2 mouse and keyboard. A "Y" adapter plugged into the mini DIN connector allows the PS/2 mouse and keyboard to share the same port. Internal PS/2 mouse and keyboard headers are also available. A self-resetting fuse protects the +5V line of the keyboard and the mouse. |
| Power Requirements |
| *Pentium 4 |
|
*Celeron |
CPU |
+5V* |
+12V# |
+3.3V* |
CPU |
+5V* |
+12V# |
+3.3V* |
2.8GHz/533 |
4.05A |
4.68A |
2.75A |
2.5GHz/400 |
4.01A |
3.85A |
2.72A |
2.4GHz/400 |
3.96A |
3.91A |
2.75A |
2.0GHz/400 |
4.01A |
3.43A |
2.72A |
2.0GHz/533 |
4.00A |
3.38A |
2.75A |
|
|
|
|
-12V @ < 100mA*
* From Backplane via PICMG ® Connector.
# From ATX12V power supply or equivalent via P4 connector |
| Power Fail Detection |
The ELK-SBC6053-107 continuously monitors the incoming +5V and +3.3V power lines from the system backplane. If the 5V line drops below 4.75 volts or the +3.3V line drops below 2.97 volts, the ELK-SBC6053-107 issues a hardware-reset command. This feature helps maintain control and allows the system to automatically restart. A two-pin header is available for applications that require an external reset switch. On-board power lines are also monitored in a similar fashion. |
| Battery |
Built-in lithium battery for data retention of CMOS memory. |
| Environments |
| Operating Temperature :0° - 45° C. |
| Extended Operating Temperature : 0° to 55° C. |
| Storage emperature:-40° to 70° C. |
| Humidity :5% to 90% non-condensing |
A Intel ® Pentium ® 4 processor can consume as much as 70 Watts of power on the ELK-SBC6053-107 single board computer. The ELK-SBC6053-107's cooling system uses a high-reliability fan. |
| Dimensions |
13.3"L (338mm) x 4.8"H (121.9mm) x 1.65"W (49.1mm). |
| Standards |
- IEEE P996, Personal Computer Bus Standard
- PCI Local Bus Specification 2.1
- PICMG 1.0 Specification
- Ultra160 SCSI, SPI-3 Standard |
| MTBF |
118,000 POH (Power-On Hours) at 40° C., per Bellcore |
