| CPU Support |
Intel ® Pentium ® 4 processor at 2.0GHz to 2.8GHz*
Intel ® Celeron ® processor at 2.0GHz to 2.5 GHz*
*Higher speeds as available |
| Chipset |
The Intel ® 845GV chipset features integrated video and graphics plus support for a 400/533MHz system bus, DDR200/266/333 memory and dual USB 2.0 compatible interfaces. |
| Bus Speed |
ISA:16-bit/8MHz, PCI: 32-bit/33MHz, System/FSB: 400/533MHz |
| Bios(Flash) |
AMIBIOS8 ® with built-in advanced CMOS setup for system parameters, peripheral management for configuring on-board peripherals, PCI-to-PCI bridge support and PCI interrupt steering. Supports flash devices for BIOS upgrading via floppy interface. Also provides integrated support for USB mass storage devices such as USB CD-ROM , CD-RW , etc. Custom BIOSs are available upon request. |
| Cache Memory |
The Intel ® Pentium ® 4 processor options on the ELK-SBC6130-107 support a 512K integrated on-die Advanced Transfer Cache (L2). The cache is an 8-way set associative cache running at full processor core frequency. The Intel ® Celeron ® processor supports a 128K integrated on-die Advanced Transfer Cache (L2).
Both processors include a 12K level one (L1) Execution Trace Cache and 8K L1 data cache. |
| Main Memory |
Double Data Rate (DDR) memory improves memory data speeds demanded in data-intensive applications. The DDR200/266/333 interface is a single-channel interface coming off the Memory Controller hub and terminating at two DIMM module sockets. The DIMM sockets can be independently populated with either PC1600, PC2100, or PC2700 unbuffered memory modules. The memory interface supports auto detection of memory up to 2GB. The bandwidth of the DDR200/266/333 memory interface is 1600MB/s, 2100MB/s, or 2700MB/s. |
| PCI Bus Interface |
The PCI bus interface supports a 32-bit PCI backplane interface running at a 33MHz bus speed. |
ISA Bus Interface
|
The ELK-SBC6130-107 provides a 16-bit ISA bus interface to the backplane for legacy ISA slots. |
Eide Ultra ATA/100 Interfaces
|
Dual high-performance PCI Bus Master EIDE interfaces are capable of supporting up to two IDE disk drives each in a master/slave configuration. The interface supports Ultra ATA/100 with synchronous ATA mode transfers up to 100MB per second |
| System hardward Monitor |
The Winbond W83783S chip supports hardware monitoring. The functions monitored are voltage, fan speed and temperature. The ELK-SBC6130-107 hardware monitor driver allows the user to program the monitor limits to provide trigger points for the application software. This allows the application program to monitor the trigger points in order to send system alert messages or perform corrective actions. |
| Ethernet Interfaces |
The I/O Controller Hub of the ELK-SBC6130-107 provides a 10/100Base-T Ethernet interface. An RJ-45 connector on the I/O bracket provides the physical interface to the Ethernet network. |
| Serial Interface |
The Super I/O controller supports two full-function serial ports with independently programmable baud rates. The controller has two high-speed, NS16C550 compatible UARTs with Send/Receive 16-byte FIFOs. The IRQ for each serial port has BIOS selectable addressing. |
| USB Interfaces |
The ELK-SBC6130-107 supports two high-speed USB 2.0 ports for data transfers up to 480Mbit/sec. It also supports USB 1.1 devices for data transfers at 12 or 1.5Mbit/sec. The Universal Serial Bus (USB) is an interface allowing for connectivity to many standard PC peripherals via an external port. |
| Video Interfaces |
The analog video interface of the Intel ® 845GV chipset has a wide range of video and graphic capabilities including pixel resolution capabilities of up to 2048 x 1536 (QXGA) and support for high performance 3D, 2D graphics and video. The chipset uses a portion of the ELK-SBC6130-107's DDR system memory to provide video memory. Software drivers are available for most popular operating systems. |
| Floppy Drive Interface |
Supports up to two floppy disk drives in combinations of 360K to 2.88MB. |
| Keyboard and PS/2 Mousw Interfaces |
The parallel port interface is compatible with IBM PC/XT ® , PC/AT ® , PS/2 ™ , Enhanced Parallel Port (EPP1.7, EPP1.9) and Extended Capabilities Port (ECP) modes of operation. Both the EPP and ECP modes are IEEE 1284 compliant. The parallel port has BIOS selectable addressing. |
| Enhanced Bi-Directional Parael Interface |
The parallel port interface is compatible with IBM PC/XT ® , PC/AT ® , PS/2 ™ , Enhanced Parallel Port (EPP1.7, EPP1.9) and Extended Capabilities Port (ECP) modes of operation. Both the EPP and ECP modes are IEEE 1284 compliant. The parallel port has BIOS selectable addressing. |
| Wachdog Timer |
The programmable watchdog timer provides a system reset with a total range of 30ms to 60 seconds. The programmable increments of the watchdog are 30ms, 10s and 60s. |
| Power Requirements |
| *Pentium 4 |
|
*Celeron |
CPU |
+5V* |
+12V** |
+3.3V* |
CPU |
+5V* |
+12V** |
+3.3V* |
2.8GHz/533 |
3.01A |
4.65A |
2.01A |
2.5GHz/400 |
2.95A |
3.85A |
2.00A |
2.4GHz/400 |
2.95A |
4.38A |
2.00A |
2.0GHz/400 |
2.85A |
3.45A |
2.00A |
2.6GHz/533 |
2.95A |
3.90A |
2.00A |
|
|
|
|
2.0GHz/400 |
2.95A |
3.28A |
2.00A |
|
|
|
|
* From backplane via PICMG ® connector.
** From ATX12V power supply or equivalent via P24 connector. |
| Power Fail Detection |
The ELK-SBC6130-107 continuously monitors the incoming +5V and +3.3V power lines from the system backplane. If the +5V line drops below 4.75 volts or the +3.3V line drops below 2.97 volts, the ELK-SBC6130-107 issues a hardware-reset command. This feature helps maintain control and allows the system to automatically restart. A two-pin header is available for applications that require an external reset switch. On-board power lines are also monitored in a similar fashion. |
| Battery |
Built-in lithium battery for data retention of CMOS memory. |
| Environments |
| Operating Temperature :0° - 45° C. |
| Extended Operating Temperature : 0° to 55° C. |
| Storage emperature:-40° to 70° C. |
| Humidity :5% to 90% non-condensing |
A Intel ® Pentium ® 4 processor can consume as much as 70 Watts of power on the ELK-SBC6130-107. The ELK-SBC6130-107's cooling system uses a high-reliability fan. |
| Dimensions |
13.3” L (338mm) x 4.8” H (121.9mm) x 2.3” W (58.4mm). |
| Standards |
- IEEE P996, Personal Computer Bus Standard
- PCI Local Bus Specification 2.1
- PICMG 1.0 Specification
- Ultra160 SCSI, SPI-3 Standard |
| MTBF |
TBD POH (Power-On Hours) at 40 °C., per Bellcore |
