|
|
| 현재위치 : HOME> PRODUCT> 산업용컴퓨팅> SKD Platform> 5U Enclosure |
|
 |
|
|
5U 19" Industrial Rack-mount System Enclosure ELK-5530 Series |
|
|
|
|
|
|
|
|
|
The ELK-5530 Series chassis is a high performance design in a low cost 5U rackmount enclosure. Feature rich, the ELK-5530 Series is a solid, robust design which will meet the most rigorous and demanding requirements. This chassis is ideal for I/O intensive applications such as telephony, data acquisition, Digital Video Recording (DVR), high density web server, back office server, firewall, proxy server and VPN gateway applications including collocation. The enclosure is constructed of 18 gauge steel, clear zinc plated for corrosion protection and an attractive appearance. The front panel is attractively detailed and is of heavier gauge than the chassis. There is a huge amount of drive space with the four front accessible 5-1/4" drive bays. This allows for a low cost RAID implementation using SCSI or ATA drives. One external 3.5 inch drive is also available. A door covers and protects the drives. Accessible behind the door is the power and reset switches as well as the power-on and drive activity LED's. The LED's are visible through the door when it is closed. Cooling is provided by four 90mm 51CFM hot swap fans. Alternatively, three 120mm 90CFM fans can be installed. The fans provide tach signals for failure detection by the motherboard. The ELK-5530 Chassis provides for mounting a 20-slot passive backplane. A wide variety of backplanes are available offering different mixes of ISA and PCI slots. Depending on the CPU selection, up to 19 plug-in cards can be installed. Power is provided by dual full-sized front accessible redundant supplies. Front accessibility of the power and drives means very low MTTR in the event of a component failure.
Configured Systems Offered.
ASAN ST Co., Ltd. offer a complete product line including the latest SHB, SBC, motherboards, drives, video boards and plug-in cards including analog/digital I/O cards. Integrating today's complex systems can be a challenge. Allow us to provide you with a professionally integrated system with the OS loaded and the system tested and burned-in as a complete unit. We stand behind our work 100%. |
|
|
|
|
| Dimensions |
483(W) x 222(H) x 671(D) mm (19" x 8.65" x 26.4") |
| Disk Drive Bays |
Four 5.25" and one 3.5 Disk Drive(Front Accessible) |
| Front Panel Controls |
Locking front door provides drive security
Power switch: Black momentary rocker with 2 position .100 header for board connection
Reset switch: Four pushbuttons with 2 position .100 header for board connection*
Power LED: Green with 3 position .100 header for board connection
Drive Activity: Red with 2 position .100 header for board connection
Switch and LED connectors are labeled at the connector end.
Hold-down bar to secure installed feature cards
Removable rack ears for benchtop applications
* Note: Four reset switches are provided for use with up to a 4 section segmented backplane. |
| Rear Panel Details |
20 Plug-in card slot and Four keyboard connector holes. |
| Cooling System |
Four 90mm 51CFM fans with tach signal Positive chassis pressure or Three 120mm 90CFM fans with tach signal |
| Power Supply |
Front mounted redundant to 600 Watts. Optional 12, 24 or 48VDC supplies available |
| Passive Backplane |
20-Slot ISA/PCI accommodated
-20 ISA Slots, 3 CPU/13 ISA/4 PCI, 20 ISA Slots(Split 4 x 5), and Split 4 x 2 CPU/3 PCI |
| Plug-in I/O Cards |
Depending on configuration, accommodates up to 19 plug-in I/O cards |
| Rack Slides |
Please contact us for an offering of available rack slides. |
|
|
|
|
|
 |
 |
| ELK-5530PB |
6U 19" Industrial Rack Mount Computer System Enclosure(For 20 Slot Passive Backplane) |
| ELK-5530ATX |
6U 19" Industrial Rack Mount Computer System Enclosure(For ATX Motherboard) |
| Optional |
SHB, SBC, ATX Motherboard, Passive Backplane and ATX Power Supply(300W, 350W, 400W) |
All specifications within this document are subject to change without notice. |
|
|
|
